Question about 1995 Dodge Neon
I stopped to get gas after work and engaged the parking break before turning the car off. I filled the tank and got back in the car. When I turned it back on and disengaged the parking break, only my passenger side low and high beams work. Any ideas on how to resolve the issue?
Have you checked the fusebox drivers side lower adsh as there is probably a fuse for each side of vehicle lights ets list of fuse location should be on the lid/cover.just a thought you have turned the light switch to 'parking light' position , there is also a fuse box in engine compartment worth checking keep me posted if you wish
Posted on May 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi the first thing I check on for anyelectrical problem is a bad ground connection. Follow the headlight wires as far as you can, even when they disappear into a larger covered loom at random places, maybe even right next to each light, you will find a wire or several attached to ground, could be a inner fender, engine, etc.. sometimes a inner fender ground is just a selftapping screw, It may be rusted out or just loose. Headlights work through relays that are also located in the fuse boxes. I assume you have checked both fuse boxes, in the truck and under the hood, good luck, Chuck
Posted on Mar 16, 2009
Remove the front control module. (in front of the fuse panel under the hood) There are pins in there that get corroded. Give them a slight twist. this will increasetheir connection when you put the module back in. I had the same issue. took about ten minutes to fix. Dealer wanted 4 to 6 hundred for a new module.
Posted on Nov 27, 2009
check the bulb socket to make sure the wires are in place, maybe a old prong maybe stuck inside?? it is a wire problem...broken or came loose..
Posted on May 24, 2011
Tips for a great answer:
Oct 23, 2015 | Saturn Cars & Trucks
Feb 06, 2015 | 2000 Dodge Neon
Jan 23, 2014 | Cars & Trucks
Feb 15, 2010 | 2002 Audi A4
Feb 14, 2010 | 1995 Chevrolet Blazer
Dec 11, 2009 | 2004 Dodge Neon
Jul 28, 2008 | 1995 Dodge Neon
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: