Question about 1995 Suzuki Vitara

Open Question

Vitara clutch wich way round does plate go

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 534 Answers

SOURCE: have to change clutch plate on suzuki grand vitara

If it's hard to get into gear you should check the clutch is disengaging properly.
Before changing the clutch plate, check that the clutch throw-out is adjusted correctly and the actuating hydraulics/levers have the correct amount of travel.

Posted on Oct 11, 2009

Ad
  • 2309 Answers

SOURCE: I have changed the Clutch kit without pilot bearing

that happens more times than you think, most probably you won't have any pproblems, ita all up to you

Posted on Nov 20, 2009

Testimonial: "Thanks a lot."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can't I put car in first or second after I changed the clutch it is 96 ford escort 5 speed manual transmission


it is very possible that the clutch plate is in the wrong way round and the clutch hub is hitting on the flywheel bolts

means a box out again and the pressure plate off to change the clutch plate around

Sep 13, 2015 | Ford Cars & Trucks

1 Answer

Hilux clutch


where is the throwout bearing? most are behind the plate.. the fingers are on the backside..

Jan 24, 2014 | Cars & Trucks

1 Answer

GEARBOX 1995 USUZU MU 3.1 DIESEL


If the clutch is not disengaging when you put your foot on the clutch ( if the system has been bled correctly or cable fitted correctly ) then the problem is that the clutch plate is in the wrong way round and the clutch hub with the springs is hitting on the flywheel bolts

Jan 10, 2014 | Isuzu Pickup Cars & Trucks

1 Answer

I have a 2000 suzuki grand vitara that has a problem going int gear


check and bleed the clutch system at the slave cylinder and if that dose not improve the clutch operation then replace the master cylinder. If the system is cable operated then replace the cable. If you have removed the clutch to replace it then the clutch plate is probably in the wrong way round and the centre is hitting on the flywheel bolts.

Nov 22, 2013 | 2003 Suzuki Grand Vitara

1 Answer

Which way round does the clutch plate go on s40 1.8 '00


springs to the gearbox ,fit it the other way around and the clutch will not di engage

May 11, 2012 | 2000 Volvo S40

2 Answers

I have changed the Clutch kit without pilot bearing


Only if it is noisey. It would have been advised when the box was out but now it is back together it isn't worth the effort... you'll be fine :o)

Nov 20, 2009 | 1999 Suzuki Vitara

1 Answer

Have to change clutch plate on suzuki grand vitara ,its hard to put in gears


If it's hard to get into gear you should check the clutch is disengaging properly.
Before changing the clutch plate, check that the clutch throw-out is adjusted correctly and the actuating hydraulics/levers have the correct amount of travel.

Oct 11, 2009 | 2003 Suzuki Grand Vitara

1 Answer

1999 2.0L TD Suzuki vitara the clutch pedal was low and grumpy when pressed and hard to select 1st or reverse. plenty of movement in clutch slave arm and no fluid leaks to be seen.so i removed the gearbox...


Pilot bearing (pressed into flywheel) or release bearing (presses against clutch pressure plate)?
Regardless, the repair is the same. Replace clutch disc, pressure plate, release bearing & pilot bearing. Most flywheels are available or as part of a complete kit, minimum is to inspect & resurface flywheel when replacing clutch assymbly.

Feb 17, 2009 | 1999 Suzuki Vitara

Not finding what you are looking for?
1995 Suzuki Vitara Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...