Question about 2006 Ford Freestyle

Open Question

What is this b 1596 code

How to fix

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CODE P0430 GMC


As the code description implies the P0430 code means that the vehicle's control module has detected that the three-way catalytic converter is not working properly (is not as efficient as the factory is expecting). Replacing the oxygen (O2) sensors may sometimes fix the code, but in most cases the catalytic convert needs to be replaced to fix the problem. If the P0430 code is combined with other codes, try fixing the other codes first.

Jul 06, 2016 | GMC Cars & Trucks

1 Answer

How do i fix my Mercury Villager 2002 with random misfire?


How to Fix error code P0300 for random misfires on your car ...

diy-auto-repair.wonderhowto.com/.../fix-error-code-p0300-for-random-...
Oct 15, 2010 - How to Fix error code P0300 for random misfires on your car ... amisfire (code P0304) on a 1999 Mercury Villager 3.3L ยท How to Fix error code P0500 ... I reset my codes and it ran fine for a couple of days, then I started getting ...

(code P0305) on a 1999 Mercury Villager 3.3L - auto repair

diy-auto-repair.wonderhowto.com/.../troubleshoot-misfire-code-p0305-1...
Sep 7, 2010 - The vehicle is a '99 Mercury Village, 3.3L, with 150000 miles on it. The chief ... How to Fix error code P0300 for random misfires on your car ...

2000 Villager Misfire - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Mercury > Villager
May 24, 2010 - 2000 Villager Misfire Villager Car Forums. ... i was told that the 3.3L engines of 1999-2002 nissan quests/ mercury villagers are INTERFERENCE engines! ... Hope the following may help, and I will post if my last fix works. ... I have a 1999mercury villager that is showing a random multiple cylinder misfire ...

Rough Idle - 2000 Mercury Villager - RepairPal

repairpal.com > Questions > Mercury > Villager > 2000 Mercury Villager
Repair the code issue, because your Villager has OBD-II which is a very helpful Diagnostic system. Upvote (4) ... My 1999 Villager was running poorly; rough idle, lack of power at highway speeds and the engine problem light indicated random miss-fire, etc. I had new spark ... Have code po306 cylinder 6 misfire detected.

P0301 - OBD-II Trouble Code - RepairPal


Dec 17, 2015 | 2002 Mercury Villager

1 Answer

Cam positioning sensor on 91 ford tempo 2.3 put pictures on please or ecc relay can't find either of them


There is no "cam" sensor. The ignition gets its signal from the pickup coil located inside the distributor. That signal is sent to the ignition module, bolted to the side of the distributor, then sent to the EEC module where it is processed and then sent back to the ignition module. The ignition module then grounds the coil which produces the spark.... in a nutshell.

The EEC relay is located behind the dash on the drivers side just above the blower motor. I attached a photo that I found.


http://www.fordforumsonline.com/attachments/91tempo-jpg.1596

Oct 07, 2015 | Ford Cars & Trucks

1 Answer

Codes p56, p57 p161 how to fix


I'm looking at the code book and ALL codes are 4 digit codes, EX POO56, POO57 and PO161. If these are What you are getting, they all are codes for the left and right hand oxygen sensors. Could be wiring, Sensor itself or ECM

May 30, 2015 | 2003 Saturn VUE

1 Answer

Car turns over but will not start i have changed plugs and checked coils for 2.4l direct ign coils ohms only at 1596 and 1857


sound like you may not be getting any fuel check all of the vacum line's and make sure your fuel pump is working properly

Aug 15, 2013 | 2001 Pontiac Grand Am

1 Answer

What does te engine light code p1596 mean


1596 is speed control switch malfunction. If vehicle not experiencing any drive-ability problem, I would disconnect battery for a few seconds to erase codes, then drive it for a while & see if they come back.

May 11, 2012 | 2001 Dodge Dakota

1 Answer

Check engine light. fixed but did not pass smog. light came back on


Get the code scanned again.

If it is the same code, the problem was not fixed.
Could also be another problem that came up while fixing the 1st code ( i.e. knocked a vacuum line off ).

If you do not have a code scanner, Autozone will scan the code for free, get the actual code number and post a comment back to this problem, or start a new one with the code number, and what you have done to this point ( include the 1st code and what you did in what order when attempting to fix that one ).

Feb 16, 2011 | 1998 Ford F150 Regular Cab

1 Answer

My car had an attempted breakin and resulted in damage to lower shrouds and ignitiion key part.. its a ford orion 1989 model 4dr saloon 1596 CC.. can you please advise where I can get this product and how...


The shrouds and trim will be dealer parts so you can only purchase them from a Ford dealership or a wreckers, likewise the key and barrel can be located through a wreckers but you may also be able to have the barrel repaired and / or replaced by a locksmith. They may have to recode the fittings and you may have to have two keys, one for doors etc and another for ignition but its better then not having a keyswitch at all. If there is damage to the electrical section of the ignition switch, this again may be a dealer part for replacement but you can also repair any damaged wiring with a soldering iron and heatshrink.If the electrical section has been badly damaged then a replacement part is the best and only way.. If the dealership is unable to supply these parts, try the ford forums and ford owner clubs online. I own a mark 2 cortina and I have been sourcing all my replacement parts through online owners clubs for several years now.. The workshop manual may be of assistance here but it would not contain the repair procedures for damage caused by a break in or forcing of the ignition switch. If the wiring has been cut, simply join like wires back together ( red to red, black to black etc and be careful of wire sizes, dont connect a 2mm red cable to a 6mm red cable)..insulate them with heatshrink and make sure that soldered wiring is correctly soldered and refitted back into the trims to prevent future breakage.

Nov 02, 2009 | 1989 Ford Escort

1 Answer

2001 Ram 3 error code come up, are there related? P0123 P1596 P0455 Thanks , I just bought the truck 2 months ago and at that time it was emmission tested and it passed. Im in ontario!!!


123 is TP sensor , 455 is leak in evap system, quite often bad gas cap seal or not on tight, if not that, check all hoses to evap canister & purge solenoid for possible leak. 1596 is speed control switch malfunction. If vehicle not experiencing any driveability problem, I would disconnect battery for a few seconds to erase codes, then drive it for a while & see if they come back.

Jul 06, 2009 | 2001 Dodge Dakota

1 Answer

How do i change the water pump


Have a look at link below for replacements

http://www2.partstrain.com/store/?Ntt=Water%20Pump&N=1596%2010062%204294966988

Some experience and special tools needed . Otherwise take it to a service station to do this work.

Aug 10, 2008 | Daihatsu Charade Cars & Trucks

Not finding what you are looking for?
2006 Ford Freestyle Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...