Question about 1996 Dodge Caravan

Open Question

How to reset alarm with no button - 1996 Dodge Caravan

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i find the anti theft reset button on 2006 taurus


this is for a 2003, might work.

1
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

2
Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

3
To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.

Jun 13, 2016 | 2006 Ford Taurus

1 Answer

How do I reset alarm on Toyota corola 2002


You'll need to set off the alarm for a few seconds.
then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried. This is override/reset.

Oct 30, 2012 | 2004 Toyota Corolla

1 Answer

How to disable alarm system. The alarm went off


okay, this alarm reset is done by turning the key on and pushing the reset button a few times, you will need to try this a few times to get the correct number of pushes,for example turn key on and quickly push 3 times and if that doesnt work retrey it and push it 4 times, take note that every time you try you need to turn key off and then on again before you push reset button,i know it can be set to 1- 2 -3 or 4 pushes to reset, this is programed at the time of install, most installer dont set it or tell you so you will need to try all four. good day.

Apr 15, 2011 | 1996 Nissan Pathfinder

1 Answer

My alarm keeps goin off when i connect my battery on my corsa sport r reg


When yo disconnected the battery, it set the alarm. If you have a remote control key fob, go ahead and connect the battery. Using the key fob, turn the alarm on then off. If that doesn't work, use the ignition key in the drivers door lock, turn the key all the way to the left, then all the way to the right. This should shut the alarm off. If it still won't go off, look for a reset button under the driver side dash. Hold the button down until the alarm beeps once. If you can't find a reset button, and nothing you've tried will turn the alarm off, you will need to seek help from a dealership, or a shop that specializes in alarms.

Feb 10, 2011 | Ford Escort Cars & Trucks

1 Answer

I recently replace the battery in my 2005 Ford Mustang GT. After I installed the new battery the green light for my dealer installed alarm keeps flashing even when I am driving the car. I went to the...


                Hi
                Before Battery Change

                • When was/or when did you notice alarm green light illuminated?

                • When after alarm was disarmed, did green light shine?

                First thing to check would be electrical connections starting from the battery.
                1. Follow positive wire lead from battery to fuse box connections. (Should be along driver side frame rail, or near battery.)
                2. Follow wrie harness to Relay Center. (Find Alarm Relay/Fuse)
                3. Also to Power Distribution Center. (upper driver corner engine bay)
                Relay Switch and Fuse to Alarm should be okay, given the alarm green light illumination.

                The Cars Brain, ECM Engine Control Module, manages messeges between power BattV and Alarm, also other modules and various sensors throughout the vehicle.

                When Battery Supply was disconnected, something happened, that stunned the memory in the ECM.

                Yes, the alarm does need resetting, its actually the memory messages saved in ECM need to be Refreshed.

                (saying "alarm needs resetting") sounds like alarm is broken, when that is not the case. Similar scenario is, when smart phone screen webpage freezes(alarm memory info in ECU). No buttons work, not even power button (Key Fob control). Only way to gain access is to remove battery.

                Lets try an experiment, this will be to loose still/saved frozen information, stuck in computer memory.

                How to Reset Vehicle Computer.

                1. Remove Neggative Post connection.
                2. Remove Positive Post connection.
                3. Let vehicle sit over Two Minutes, this time allows capacitors in vehicle Modules (ECM/PCM, TCM), to release any/all stored voltage, also any voltage in Vehicles ground circuit will be released.
                  • (I would typically wait 15 minutes) Capacitors with out constant Voltage input, will disipate rather quickly, depending on capacity size.
                4. With Battery Still Disconnected. Open Driver Car door, and turn Ignition to RUN Position.
                5. Reconnect Positive Post.
                6. Reconnect Negative Post.
                  • IGNITION is in RUN Position, when reconnecting Battery. Driver Door Is Open.

                  7. Turn Ignition to Off.
                  • Notice if alarm green light is illuminated.

                  8. Hit LOCK Button On Driver Door Switch to Reinitialize Alarm.
                  • Be SURE Key Fob not locked in car.

Mar 26, 2017 | 2005 Ford Mustang

1 Answer

Car alarm went off while unlocking the door, now


you need to reset alarm/immobiliser.lock car with remote, hold button down for 30 secs,then press/hold down unlock button,should reset.another way is with key in ignition/turned on, press alarm button down and hold for 30 secs.this resets immobiliser.toyota
systems vary..depending on market.

Mar 30, 2010 | 1991 Lexus LS 400

1 Answer

How to reset service alarm VW Jetta 4 2000 model


Hold the odometer button down and turn the ignition on while holding the odometer botton down. Turn the clock button to the right and relese all the buttons this should help to reset the alarm

Jan 24, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

Honda Odyssey 2004 no alarms


There is most likely a reset button under the dash somewhere. You can try pressing and holding that button down while pressing the lock button on the remote. If this does not work simply have the dealer reset it for you.

Jan 06, 2010 | 2004 Honda Odyssey

1 Answer

2001 Jeep Grand Cherokee Laredo. Alarm sets off when unlocking doors with remote and will not shut off with remote, or by pressing the reset button behind blinking alarm light under dash,or by using key in...


I found a solution on another site showing if i turn the ignition on and hold the reset button on behind the alarm light untill it turns to solid blue light then turn off the ignition , it will disable the alarm.

Dec 12, 2009 | 2001 Jeep Grand Cherokee

1 Answer

How to reset the alarm?


most alarms have a button hidden somewhere under the dash in the driver compartment, it should be a small button out of the way kinda hidden, you would need to press the button and hold it as you turn the key so it will start the car and put it in silence mode...

May 29, 2009 | 1998 Ford Econoline

Not finding what you are looking for?
1996 Dodge Caravan Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...