Question about 2008 Ford Fusion

Open Question

How to resolve a P2258 Wrench Light ON issue.

2008 ford fusion wrench light on. Car runs rough at low rpm. Code P2258 - Secondary Air Injection System Control A Circuit High. What to do next?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 56 Answers

SOURCE: ITS A WRENCH LIT UP

its the check engine light

Posted on Jan 22, 2010

Ad
  • 12 Answers

SOURCE: cruise quit working wrench light came on maybe a fuse?

Check fuses.

Posted on Oct 10, 2009

  • 1779 Answers

SOURCE: car lost drive power when orange wrench light came on.

I-95 is scary enough w/out the car causing problems. There is a problem indicated when the wrench light is illuminated. You need to check for codes stored on the cars computer to determine what is wrong. Parts stores will plug a hand held scan tool into the diagnostic port of the car, and 'read' any codes. They can explain what the codes mean, and suggest ways to fix the problem. This is a free service. If you have any questions at that time, post them here with any code #'s. The condition you describe is 'limp mode' which the car goes into to help prevent damage to any components. When you turned the car off, it reset the system, and the car was drivable. If this happens again, pull over as soon as you safely can, turn the car off, wait a coulple of minutes and restart. Get it checked out soon, as it could lead to other problems,..

Posted on Dec 07, 2009

alicantecoli
  • 22156 Answers

SOURCE: today while driving the traction

easy you have either a faulty sensor on a wheel or the painted magnetic strip in the back of the bearing has been damaged or the cover the paint sits on has corroded away ,disconnect each sensor in turn and check for continuety first and if all ok then disconnect each one in turn with vehicle jacked up and spin wheel and using meter on lowest miliamp setting to see if you read a slight voltage on a fast spin of the wheel .

Posted on Sep 07, 2011

alicantecoli
  • 22156 Answers

SOURCE: PROBLEM WITH CODE P2258, HOW TO FIX? 2006 FORD FUSSION

sorry i cannot access my codes at the moment as just re-installed windows yet again and its on the old hard drive and i do have back ups in on stand alone hard drive but my friend borrowed it which i will get back tomorrow after hes copied off a cracked version of XP from it ,so its a ford fusion with cruise ? never seen a fusion with cruise ,a mondeo yes and a focus but the fiesta i can say i havent ,have you tried looking for the code on the code reader as mine have built in codes that tell you what it means .

Posted on Mar 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 ford fusion all of the sudden start idling rough when I start it at the same time it will not shift into overdrive on highway and cruise control stopped working. Also the wrench light came on.


With the wrench light on ,DTC'S - diagnostic trouble codes are stored in the module's . This indicates there is a problem with the transmission or the electronic throttle control . Have it checked for DTC'S

Jan 09, 2017 | Ford Cars & Trucks

1 Answer

Trouble codes for 2006 ford foucos


p2258 - Secondary Air Injection System Control 'A' Circuit High
Possible causes - Faulty Secondary Air System Relay - Secondary Air System Relay harness is open or shorted - Secondary Air System Relay circuit poor electrical connection - Faulty Secondary Air System Pump

B1934 - Air Bag Driver Inflator Circuit Resistance Low on Squib

B1935 35 Passenger Air Bag Circuit Resistance Low Go To Pinpoint Test K

B2232 - Air Bag Driver Circuit Open - Loop #2 0 ' Add Comment Possible causes - Faulty Clock spring
Possible symptoms - Air Bag Warning Light ON

Dec 16, 2016 | 2006 Ford Focus

1 Answer

Need to know what code 2110 ford fusion 2006 se


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection help.png Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mV0SayWu

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

My 2006 ford fusion was working fine till i came to a stop it started shaking a red light wrench came on lasted bout ten min when i got home turned car off.my husband got in and started the car it wasnt...


Could be a lot of things ... could be something as simple as a piece of dirt or leaf in front of the mass air flow sensor. This will give the computer false readings causing it to adjust the fuel mixture causing the car to run rough.

Mar 02, 2015 | 2006 Ford Fusion

1 Answer

What does it means p2258 code for 2003 Ford Focus , Smog test Failed


P2258 Secondary Air Injection System Control A Circuit High

http://www.motorcraftservice.com/vdi...f/OBDSM505.pdf

Secondary air systems typically utilize an electric air pump as well as one or two electrically controlled check valves to deliver air into the exhaust manifold.

The only vehicle which uses secondary air is the 2.3L PZEV Focus. The Focus uses a system with ported air. This means that airflow is delivered to each individual exhaust port. The secondary air pump is energized soon after start-up while the fuel system is in open loop and icing conditions are not likely. After the O2 sensors warm up, the secondary air pump continues to be energized while the fuel system goes into closed loop fuel. The secondary air system continues to run in closed loop fuel until the air pump is de-energized. The typical time period in which the AIR pump is energized is approximately 12 seconds.

The AIR pump flow check monitors the HO2S signal at idle to determine if secondary air is being delivered into the exhaust system. The air/fuel ratio is commanded open-loop rich, the AIR pump is turned on and the time required for the HO2S signal to go lean is monitored. If the HO2S signal does not go lean within the allowable time limit, a low/no flow malfunction is indicated. (P0411)

The electric air pump draws high current and must be energized through a separate relay. Both the primary and secondary circuits are checked for opens and shorts. First, the output driver within the PCM (primary circuit) is checked for circuit continuity (P0412). This circuit energizes the relay and the vacuum-operated check and control valve(s). Next, a feedback circuit from the secondary side of the relay to the PCM is used to check secondary circuit continuity (P2257, P2258).

Nov 22, 2013 | Cars & Trucks

1 Answer

Wrench light comes on car looses power, shut car off restart no issues till later then light comes back on and car looses power


run fault codes to find the reason that the CPU keeps going into limp /shut down mode. Check oil level and water level in the radiator.

Oct 08, 2013 | 2008 Ford Fusion

1 Answer

Error code p2258


Hope this helps
Trouble Code: P2258

Secondary Air Injection (AIR) System Control A Circuit High
Possible Causes:


AIR relay fault - stuck closed Secondary AIR pump fault - circuit open in motor Open ground to secondary AIR pump Open AIR monitor circuit between the secondary AIR pump and the PCM Short to voltage in the AIR relay to secondary AIR pump voltage circuit

Oct 15, 2012 | 2004 Ford Focus

1 Answer

PROBLEM WITH CODE P2258, HOW TO FIX? 2006 FORD FUSSION


sorry i cannot access my codes at the moment as just re-installed windows yet again and its on the old hard drive and i do have back ups in on stand alone hard drive but my friend borrowed it which i will get back tomorrow after hes copied off a cracked version of XP from it ,so its a ford fusion with cruise ? never seen a fusion with cruise ,a mondeo yes and a focus but the fiesta i can say i havent ,have you tried looking for the code on the code reader as mine have built in codes that tell you what it means .

Mar 05, 2012 | Ford Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...