Question about 1986 Toyota Pickup 4WD

1 Answer

Turnes over but wont start

I am having the same problem

Posted by on

  • Greg Bernett
    Greg Bernett May 11, 2010

    What is wrong, what were the symptoms before it died and what parts have you replaced?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Cranks no start ...simple>>> three things must be present air/ spark/fuel verify the presence of these 3 items and go from there

Posted on Jun 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Car wont start turn ignition to start nothing happens,checked relays,turned on ignition jumped starter car started right up.wont start by useing ignition

Try replaceing starter relay with another of your relays. make sure they have the same part number on them if you switch them and it starts replace relay with new.

Feb 20, 2015 | 2004 Lincoln Aviator

1 Answer

How to fix back up light

check the fuses under the dash. if they are good then remove a reverse bulb and using a test light check ground and power at the socket, if you have no ground then you will have to fix the ground circuit. if you have no power then you will have to check the neutral switch to see if you have power going to it and out if not, then you will have to replace the neutral switch if you have no power going out. if you have no power going in then you will have to check the wiring to the switch from the fuse. if you have power going out of the neutral switch to the rear lights then you will have to check for a damaged wire going from the switch to the socket.

May 03, 2014 | 1996 Dodge Caravan

1 Answer

Wont start

it wont start you mean it dosnt turn over no battery left or it cranks but no start clean all the keys and you should have a master key like a green one or blue with a m on it put this key in the ignition turn on the ignition without starting then turn it off and repeat with the other keys you have as well make sure its in the park position and start it after you have finish with all the keys if wont crank over try in neutral position no start fuses battery starter and so on to check after

Apr 10, 2014 | 2002 Kia Sedona

1 Answer

Wont start, but it will turn over

this doesnt make any sense wont start but it will turn over then u say it starts but wont kick over??? hmmmmm do u have gas in it?

Jan 05, 2014 | Cars & Trucks

1 Answer

2002 chevy tahoe, i have fuel, i have spark, but wont start?

Well the third ingredient is compression, but I will assume you have that. You say you have spark, so I will assume you checked for spark at the plugs. How do you know you have fuel spray at the injectors ?

Jul 12, 2013 | 2003 Chevrolet Tahoe

2 Answers

Uplander wont start after changing battery

Wont turn over after replacing battery ??????? When you turn the key to the start position nothing happens ? Have to ask because won't turn over means something else to somebody else .
You have a engine cranks - no start or you have a no crank - no start .
Do the light's on the instrument cluster come on when you turn on the key ? Do the Headlamps work ?

Battery Disconnect or Replacement Problems

Jan 23, 2013 | 2008 Chevrolet Uplander

1 Answer

Will turn over but wont start, put 15.00 worth of fuel in it wants to start but wont

have the fault codes read first
items that will cause what you describe are crank/ cam position sensor/s and wiring but that is a guess until the codes are read

Nov 26, 2017 | 1990 Dodge Grand Caravan

1 Answer

I have a po135 trouble code I have replaced the o2 sensor and the light still comes on

If you have an engine code and you repair the part, you have to have the computer reset or it will still think the part is bad even if it is new. Have to have an obd2 scanner hooked up to reset the system

Sep 29, 2010 | Dodge Stratus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides