Question about 2011 Maserati GranTurismo S

Open Question

How to reset airbag failure alert - 2011 Maserati GranTurismo S

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset air bag code


if the light is on its because you have a problem on the system need to scann and fix before reseting

Sep 21, 2014 | 2003 Buick Regal

1 Answer

Reset srs airbag


If the airbag light is on, there is a failure in the airbag circuit, and your airbag may fail to deploy in the event of an accident.
There is no "reset." You will need to have your airbag system serviced.

Jul 25, 2014 | 2001 Toyota Avalon

1 Answer

1998 GMC JIMMY SLE PASSENGER AIRBAG LIGHT STAYS ON ALL THE TIME HOW DO I RESET IT


If there is a current failure in the airbag system, you can't reset it. The light will stay on for as long as the fault exists. You can plug GM's Tech 2 scan tool in, clear the code, and the light will turn right back on if the fault is still present in the airbag system. The only way to turn the light off (besides putting black tape over it) is to read the diagnostic code, diagnose the problem, and fix it.

Sep 23, 2013 | 1998 GMC Jimmy

2 Answers

Airbag light reset sx4


There is a manufacturer's recall on this if it's caused by a failure in the front passenger weight detection system.

The system has a minimum weight required in the front passenger seat for the airbag to deploy in an accident (if no one is in the front passenger seat during an accident, the airbag does NOT deploy). If the system fails and the car cannot determine if someone is in the front passenger seat, the light illuminates and in an accident the passenger airbag WILL deploy, even if there's no one in that seat.

The purpose of the system is to prevent airbag deployment for a lightweight child in the front seat. The fix is to replace the seat weight sensor mat...free if it's the recall item.

Mar 05, 2013 | 2008 Suzuki SX4

1 Answer

How do you reset airbag light for 2007 elantra


The airbag light is reset using a scan tool. most of these systems reset them selfs unless it sees a system failure on power up, the airbag system tests all components of the sirbag system every time you start car and if something is wrong it will leave light on, you will need to scan the computer for codes the codes will tell you what the problem is and with some testing the problem can be found.

Dec 08, 2010 | 1997 Hyundai Elantra

1 Answer

AIRBAG LIGHT IS ON


Te airbag warning is on to alert u to the fact that there is a problem in the airbag system and that it is disabled, it will not turn off until the problem is fixed and the in some cases the diagnostic module reset. The most common cause of airbag warning lites is the rotoating contact under the steering, it has an open circuit.

Dec 10, 2008 | 2000 Porsche 911 Carrera

3 Answers

HOw do you reset the SRS display


The light is on to indicate a fault in the airbag system, the light will remain on until the fault is repaired, also understand as long as the SRS waring indicator is on the airbag system is disabled

Oct 12, 2008 | 2001 Honda CR-V

1 Answer

SRS


SRS stand for Supplymentary Restraint System, The purpose of the SRS light on your instrument panel is to alert you of a potential problem with your supplemental restraint system. It should blink seven times when you turn the ignition switch to ON or START and go OFF. A possible fault in the system can lead to any of the following: (a) The light does not come on when you turn the ignition ON. (b) The light stays on after the engine starts. (c) The light comes on while you are driving. Apart from the conventional causes of these faults (faulty airbag system), majority of the light indicator problem has been attributed to ignorance while fixing or repairing mechanical and/or wiring systems within the vehicle. If the SRS indicator light alerts you to a problem, have the supplemental restraint system inspected as soon as possible. If you ignore this indication, the airbags might not inflate when you need them. Likely Causes:
  • Steering wheel modifications
  • Faulty driver/passenger seat sensors for your airbag system (located under the seats)
  • Faulty seat belt mechanism
  • Tampered system components or wiring (e.g battery jumpering)
* Sometimes, a little adjustment of your seat belts and/or seat positions might fix the indicator problem over time (if the sensors are not faulty).
Precautions:
  • Do not modify your steering wheel or any other part of the supplemental restraint system. Modifications could make the system ineffective.
  • Do not tamper with the system's components or wiring. This could cause the airbags to inflate inadvertently, possibly injuring someone very seriously.
  • Tell anyone who works on your vehicle that you have a supplemental restraint system. Failure to follow the procedures and precautions in the official service manual could result in personal injury or damage to the system.
  • If all sensors are ok, the system can be reset using appropriate tools; refer to specially trained technicians.
Cheers Fred Omorogbe (reference: https://techinfo.honda.com/rjanisis/pubs/om/PA9696/PA9696A00015A.pdf)

Sep 08, 2008 | 2001 Mercedes-Benz E-Class

Not finding what you are looking for?
2011 Maserati GranTurismo S Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maserati Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Cosku Arsiray
Cosku Arsiray

Level 2 Expert

210 Answers

Are you a Maserati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...