Question about 2006 Fiat Grande Punto

Open Question

What are the torque settings and tightening sequence for a fiat punto 2003 1.2 16v

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: fiat punto

You can replace the gaitors and track rod ends. On older racks you could fit shims to the rack to tighten up the free play. However on modern racks you need to take of the rack to recondition it. Sorry I could not be of more help.

Posted on Nov 29, 2008

  • 9 Answers

SOURCE: oil pan replacement on fiat punto

this is not a big job - infact pretty straight forward -word of warning thou do not buy the replacement pan from e-bay - only tip i can give is once removed leave it standing for 24hours so all access oil is drained - makes it easier to fit new one also a cleaner job and less likely to leak - andy

Posted on Mar 13, 2009

  • 5 Answers

SOURCE: need torque setings and tightening sequence for

stage 1 20nm,stage 2 30nm and then 90* and another 90*

Posted on Jun 27, 2009

c1apton15
  • 3400 Answers

SOURCE: Fiat punto 02 reg 1.2

I'd start with replacing fuel filter and running a good fuel system cleaner through it with next tankfull

Posted on Mar 10, 2011

robrees25
  • 1 Answer

SOURCE: Where's the AUX port located in a fiat punto

It's located in the glove box, on the top right hand side.

Posted on Jun 12, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque settings on a fiat strada 1.6 16v elx 2005 model for head and cams please


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jun 03, 2016 | Fiat Cars & Trucks

1 Answer

Torque settings on a fiat uno 1100 engine


Answer barbo(fiat mechanic) Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.

Oct 29, 2014 | Cars & Trucks

1 Answer

Torque settings for a Fiat Punto 75 sx 1242cc 1997 model and for camshaft bearing bolts please


head bolts about 65lbs ,cam bolts are a pinch with a 3/8 drive rachet so that would be around 15/20 lbs

Sep 21, 2014 | 1998 Fiat Punto

1 Answer

Head bolt torque settings


Torques Punto 1100 year 1995

1st round: 20 Nm
2nd round: 30 Nm
3th round: add a quarter

4th round: ad another qourter

sequence:
8 6 2 5 10
7 3 1 4 9

This is the 'Fire' engine, also placed in the Uno and Panda.

Oct 08, 2012 | 2005 Fiat Punto 1.2

1 Answer

Head bolt torque settings


hi have a look on this page it tells you in newton meters http://www.howtomendit.com/answers.php?id=262505
hope this helps ivan

Oct 08, 2012 | 2005 Fiat Punto 1.2

1 Answer

Need clyinder head bolt settings to replace head gasket for fiat punto sx 1.1 1997


22ft lbs 1st pass 33ftlbs 2nd pass 90 degrees final pass in alternating sequence

Apr 25, 2009 | Fiat Strada Cars & Trucks

1 Answer

Fiat punto


You can replace the gaitors and track rod ends. On older racks you could fit shims to the rack to tighten up the free play. However on modern racks you need to take of the rack to recondition it. Sorry I could not be of more help.

Oct 14, 2008 | Fiat X1/9 Cars & Trucks

1 Answer

Torque setting for rear wheel bearing nut.Fiat Punto HGT Diesel 2004 plate


Chap at work had done the job some months ago.

Many thanks

PS The car was a Punto not a Pininfarina, however the drop down boxes could not be edited for some reason. I had to choose a car from the list ?

Aug 27, 2008 | 2005 Fiat Pininfarina

Not finding what you are looking for?
2006 Fiat Grande Punto Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...