Question about Cars & Trucks
Do not think you will find either one, on tilt steering components,
short of spending a couple hundred for factory work shop manual,
& I would put my money on that being of no value for that repair
Posted on May 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
in order to fix this you will need a steering wheel puller and a press I can't remember the name of it but once you get the wheel off you have to press the ring and then get the lock off and then it is pretty simple you can do it with a flat bar and some sockets bot the proper tools are cheap enough that they are always handy
Posted on Dec 25, 2008
SOURCE: tilt steering play
i have the same problem with mine several times you have to pull the steering off and the spring loaded plate behind the wheel then set back in the column there are 3 torx type fine thread screws you have to tighten and this will take care of the side to side of the tilt wheel if not tightened properly you will have to repeat this procedure again and again good luck
Posted on Feb 05, 2009
Ok Here is what you need to do this job
1. #8 tork head wrench
2. # 3 tork head wrench
3. New cylinder or lock buy at junk yard or from dealer or lock smith with keys.
4. Tube of lock tight
5. steering wheel removal tool Rent it from Schucks
6. steering wheel spring compression tool Rent it as well.
7. Two dental picks to remove spring.
Now make thew wheels straight and pull the horn button off should just pop off, next you will see a nut 3/4 inch remove the nut now find the right size of threaded bolts out of the kit and put them in the holes with puller over the steering column remove steering wheel. Forgot to mention remove the metal cup and plastic ring held on by a3 philips screws. This is your horn button, next put the U shaped compression tool on the bolt that you took the nut off and compress the spring 1/4 of an inch to 3/8's of an inch. Now take the picks and get them under steel ring slide the ring over the steering bolt and pull clamp off now remove plastic plate you are now where you can get to the 2 screws on top to tighten the steering wheel. you will see a screw just at the end of the cylinder lock remove the one screw and pull the cylinder lock out, put a drop of lock tight on each screw and tighten down look to see if you see a wire by the lock ring is sticking up it will have a 45 bend in the copper wire there will be two one side by side this has to be pulled out along with the plastic holder that holds the two wires in this also holds the lock in as well as the one screw, install the new lock put lock tight on the screw and install new cylinder lock and key once you have done all of this leave it apart and get back to me so I can tell you how to remove the bueaty ring to get to the screw on the back side.
Posted on Jun 15, 2009
SOURCE: how do I disassemble a
Click on the link to get access to the information you requested, once you uninstall one component, ie. steering wheel, select from the SELECT A CHAPTER menu, on the left of the screen, the next component to uninstall. http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528008f5f5
Good Luck!! Don't forget to rate this post!!
Posted on Oct 04, 2010
Tips for a great answer:
Apr 19, 2017 | Cars & Trucks
Jul 24, 2013 | 1988 Chrysler LeBaron
Aug 23, 2011 | 2002 Ford F250 Super Duty SuperCab
Aug 21, 2011 | 1992 Mercury Grand Marquis
Aug 20, 2011 | 1993 Pontiac Sunbird
Aug 15, 2011 | 1993 Jeep Grand Cherokee
Aug 15, 2011 | 1991 GMC Sonoma
Aug 09, 2011 | 1985 Mercury Cougar
Mar 03, 2011 | 1991 Jeep Wrangler
Feb 19, 2011 | 1988 Chevrolet C1500
19 people viewed this question
Usually answered in minutes!