Question about Cars & Trucks

1 Answer

Mitsub plant 02 won't start and its not the batt

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Tasha, lots of possibilities here, so we need more info on what is happening. When you say it won't start, do you mean:

  • Nothing happens at all when you turn the key (dead silence)?
  • The engine cranks, but it does not fire?
  • The engine does not crank, but it makes a clicking noise under the hood?
  • And how are you so certain it is not the battery (or at least the connections to the battery)?
Let me know more about what is and is not happening, and I'll see if I can help you diagnose the problem.

Posted on May 12, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My 2004 Taurus won't start and the only codes are for an 02 sensor

what do you mean won`t start. it won`t turn over or it turns over but won`t start or it will run for about 2 seconds then stop?

May 24, 2015 | Cars & Trucks

1 Answer

What could be wrong with my 02 xterra wont start no cranking noise. Did start after it was jumped?

Have your battery checked it should read about 13.3 volts with the car off. If the batt. is discharged have it charged and then check your alternator to make sure it is charging.

May 27, 2014 | 2002 Nissan Xterra

1 Answer

My jeep grand Cherokee lorado 1998 won't start. If

are the inside of the battery terms dirty,corroided? do you know if motor alt is charging batt? how long did it run when you put new batt in? if it lasted about two days, its proubly not charging, also make sure nothing is being left on draining batt down, to check that, leave batt nuhooked pos side over night.

Feb 19, 2013 | Cars & Trucks

1 Answer

Won't crank has new battery

if the lights come on you'r getting juice from the batt,if they go out when you crank the motor over batt is bad or you have bad batt connections

Aug 27, 2012 | 2000 GMC Jimmy

1 Answer

My 1997 Subaru Impreza won't turn over.

here is a trick ...jump it off and unhook + batt cable if car shuts off alternator if stays on replace batt

Aug 16, 2012 | 2002 Subaru Legacy

1 Answer

Starts...won't start...not battery, not starter, not alternator. Just clicks when turn key. Some safety start disable???

Mine did the same thing. After having the batt checked and being assured there was nothing wrong with it I went "old school" and pulled and cleaned the batt cable ends. Also cleaned the connections just downstream from the ends as they were easy to get to. Haven't had a starting problem in 8 months now so must have found something. Hope this helps ya . Sometimes we get so wound in in high tech that forget the KISS system of troubleshooting.

Oct 12, 2011 | 2008 Dodge Grand Caravan

1 Answer

'02 Saturn SL2 twin cam. Turns over but won't start. Warning lingts flicker.

is the batt fully charged-may need to titen cable connects--may be failen batt or alternator--isit gitten fuel--get car scanned from mobile tech

Aug 11, 2010 | 2005 Saturn SC2

1 Answer

Might Max 210,000 Mile check engine light is on. Code says 42 (fuel pump) No problems with truck starting or running. Reset with switch and reset by disconnecting neg Batt. Light comes back on.

Not sure what year you have but if its newer than a 96 then the code is for an 02 sensor. Bank1 sensor 3

It will be the sensor after the catalytic converter. It needs to be replaced. The code is a heater code and always it points to a bad 02 sensor.

Jan 04, 2010 | Mitsubishi Mighty Max Cars & Trucks

1 Answer

Will not crank

Naw, not really odd. That usually happens when there is a bad batt ground connection. Remove and clean the battery cables, pay close atention to the negative cable. snug them down and make sure the post is not broken where the bolt goes if it is a side terminal battery. Good Luck_Ned_

Oct 18, 2009 | 2002 Lexus ES 300

2 Answers

How do i change the headligghts bulbs in a mitsub. galant 2001

the lights a rubber sleeve around them and you have to remove it first to get the bulb unplugged.

Jul 08, 2008 | 2001 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides