Question about Cars & Trucks
You need to open the door from the inside. Call the police in your area and ask if they could send somebody to your location with a slim jim to open the door for you. if you have aaa they will come to your location and open the door for you, Last resort call a locksmith they have the tools to open the door without damage but they will charge you.
Posted on May 13, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The egr valve has two sensors. One is an EGR position sensor which is physically attached to the EGR valve. The other sensor is the DPFE (Delta Pressure Feedback EGR) sensor, commonly called the EGR pressure sensor. It's location varies depending on the engine you have. You can fine this sensor by following the vacuum hose on the EGR valve. It will be with in inches of the EGR valve. The sensor will be black (plastic) or silver (metal), have two or three vacuum ports and an electrical connection on it.
The vacuum pressure sensor is a high failure item on fords. Any Ford parts department will have one in stock, as well as some aftermarket parts stores.
The new sensor may not look exactly the same as the old part, but will have all the hook ups as the old one. You may also need to replace the vacuum hose to the sensor as well
Posted on Feb 25, 2009
I had the same problem and I finally found the solution after taking the panels from the inside of the door. Ford makes these vehicles with plastic clips to hold the bar that releases the latch and after so much repetitive usage of them they break. so most likely you will need to go to a ford dealership to get these clips which are stupidly priced at $3.00 a piece. All you need to do is take out the old pieces and put in the new and they'll most likely last you for another 10 yrs. but that's not a guaranteed fix from Ford.
Posted on May 22, 2009
remove interior door panel(need special tool to pop plastic clips holding panel to door)with panel off remove plastic film,with window up you should be able to see two 10m nuts-bolts to remove-also have to pop lever off that goes down to door latch
Posted on Sep 19, 2009
Tips for a great answer:
May 11, 2014 | Cars & Trucks
Feb 14, 2013 | 2000 Ford Ranger SuperCab
Nov 09, 2012 | Ford F150 Cars & Trucks
Mar 05, 2011 | 2000 Ford Ranger SuperCab
Feb 01, 2011 | 2008 Ford F-350
Aug 23, 2010 | 2000 Ford Ranger SuperCab
Nov 18, 2009 | 1999 Ford Ranger SuperCab
Sep 19, 2009 | 1998 Ford Ranger SuperCab
Jun 21, 2009 | 2002 Ford Ranger Regular Cab
Jun 20, 2009 | 1992 Ford Explorer
26 people viewed this question
Usually answered in minutes!