Question about Cars & Trucks

1 Answer

Yamaha r1 1999 need a video how to install a dog bone

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 20,706 Answers

Try posting to Motorcycles..??????????? this is cars... sorry.

is utube search busted>?
btw love the bike, id never get one because id be dead first hour.
zillion miles on bikes mostly offroad, big time.
my street bike was BMW1977R100s. a torque monster. a classic in mint condition, btw.
my guess you are using slang for the front fork braces?
top or bottom, i guess top.
depends on options, is this got air fittings on top?
so its off already so you didnt take it off, this a basket case (done many)
?
post a photo so others can see where you are, process wise.
on mine, you put it on, and then set up perfect alignment then torque down the clamps and put on top cap.
most bikes. The bike has and FSM book an its in that book.
this dog bone
or rear dog bone
or the damper dog bone on some.

rear
http://i.ebayimg.com/00/s/NDgwWDcyMA==/z/yUcAAOxyf1dTJ4qQ/$_3.JPG

as you can see dog bone means , near nothing.

a stip of metal with 2 holes.....
stock parts, OEM parts.
aftermarket parts?
what?

Posted on Jun 24, 2014

  • _-__-___-_
    _-__-___-_ Jun 24, 2014

    to front fork top clamp is a dog bone.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a 1990Toyota celica gt 2.2.and it vibrates pretty bad.but when I turn on ac it stops. When I give it gas it vibrates again.that's standing still.in park. Does the same when going down the road..I've...


Engine control rod/dog bone mount could be bad it is located next to timing belt cover looks like dog bone. Check by holding foot on brake with car in gear and watch if engine rises and falls=bad dog bone that is the only thing I can think of hope it helps

Aug 03, 2014 | Cars & Trucks

1 Answer

Yamaha r1 1999 video how to install a dog bone


Video? You want a video to show you how to replace a dog bone?

May 11, 2014 | Cars & Trucks

1 Answer

Dog bone location


Remove the top dog bone & either pull the motor
toward the front or radiator & block it, or go to amazon
& buy the tool that bolts into the dog bone mount & screws
closed, bringing the motor forward

You could make up something if time isn't an issue

Jul 27, 2012 | Pontiac Grand Am Cars & Trucks

1 Answer

Dog bone location 2005 grand am gt


Depending on the engine, some have a mount on top of the radiator.
Its called a dog bone because it is a metal strip with a rubber piece in each end, like a bone. One end bolts to the radiator support, the other bolts to a bracket on top of the engine.
If it has one, you set the brake, put the trans in neutral, unbolt one end and pull the engine forward. Some mounts have a secondary hole to put the bolt in to hold the engine forward.
You can look up "motor mounts - struts" at the online auto parts stores for photos.

Jul 27, 2012 | Pontiac Grand Am Cars & Trucks

1 Answer

Need diagram for 1997 toyota camry 2.2 timing marks


Quick fix timing TDCproblem 0. Jack up car on passenger's side, block up for safety. 1. Remove tire #17 lug bolts
2. Remove skirt #10 2 bolts
3. Set crank to TDC "0" #17 bolt on crankshaft. 4. Loosen Power steering pump adjuster bolt #14 remove beltoff pulley. 5. Push PS pump back to fire wall far as possible. 6. Remove both bolts lower dog bone #14 bolts. they are a dog to get off.
6b step one withbraker bar get them loose. 6c Get smaller 1/4" socket wrench to fit on it. #14 1/4 to slip on it in a tight place. 6d Removebolts. Put in lower bone bolts in a cup for i.d.
7. Remove upper dog bolts. Put it upper dog bone cup. 8. Take out dog bone. parts 9. Remove bolts holding in upper timing belt cover. put intiming belt cover cup. 10. Remove upper timing belt cover. Yellow 11. unlock tichner #14 push down on tinchner lock it to makeloose belt. remove thespring with needle nose pliers if it makes it eazy. 12 MOVE CAM TO SEE THE HOLE AND THE ROUND HOLE BEHIND IT,NOT THE OTHER MARK.AS THE BOOK SAYS. THE ROUND HOLE IS ABOUT 5DEG BEFORE THESLIT MARK THAT YOU DON'T WANT TO USE. 13 SLIP THE BELT BACK ON CENTER THE TENCHIN ON THE BELT INBOTH DIRECTIONS FROMTHE CAM SHAFT. ONE TOOTH BACK OF FOWARD RECHECK CAM ANDCRANK MARKS. TIGHTEN IT UP TIME. 14 RELEACE TISHINGNER, TIGHTEN BELT PUSH CAM TO THE LEFT. TO GET TIGHT INBOTH DIRECTIONS TEST FOR PLUCK TONE. 15 START UP CHK TIMING WITH LIGHT. 16 BUT POWER STERING PUMP BACK TIGHT. 17 PUT TIMING COVER BACK ON 18 REINSTALL DOG BONE 19 PUT SKRIT BACK ON 20 PUT TIRE BACK ON. TEST IT ON 3 TRIPS.

Oct 13, 2010 | Toyota Camry Cars & Trucks

1 Answer

I have 1994 saturn sl i found a motor mount on the bottom of the engine no bolt in it it looks like a dog bone i think it is missing a mount i would like a picture where it mount on the motor thank you...


There is a dog bone mount at each end of the engine. If it is on the bottom of the engine, something is totally out of whack. The bottom mount is under the transmission and does not look like a dog bone. I am assuming you must be writing the about passenger side, where the serpentine belt is. Remove the right front wheel, put the car on jack stand and remove the plastic service panel behind the wheel. The bolt hole where the dog bone bolt goes will be evident, or there will be a broken bolt. If the dog bones have not ever been changed this would be a time to do that and maybe the belt tensioner too. The other one is under the battery tray, both are fairly easy to replace, assuming you do not bust a bolt off.

Aug 11, 2010 | 1994 Saturn Sl

3 Answers

What is the dog bone


It's an engine mount. Usually it will be one at top/front engine and one onside /bottom engine. They are easily replaced, just be sure to take the weight off the mounts with a jack.

Feb 19, 2010 | 2001 Dodge Neon

1 Answer

Need motor mounts for 2004 Chrysler Pacifica


I'm thinking it has 1 motor mount and 2 dog bones. The mounts usually cost around $30 each and the dog bones $20-25 depending on the material their made of. You can replace these yourself, one at a time. The engine has to be jacked up just enough to take the weight off when you remove the mount. After you have it remove, install you new one/ones and tighten. After removing jack, torque the bolts to spec. Same thing is done with the dog bones. It a type of Motor mount that prevents the engine from leaning weight. These are usually located, one front/top engine area and one on bottom engine area.

Jan 13, 2010 | 1995 Mercury Sable

1 Answer

Price on replacing both left and right dog bone engine supports


Purchase new dog bones for approxinmately $12 ea and replace one at a time. This is a very easy job.

Jan 09, 2010 | 1997 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...