Question about 1994 Nissan Pickup
While driving at 70 the truck starting slowing down to about 35 going up hill. it takes a very long time to get up to any speed. no matter how much accelerator you give it does not respond. idles fine. Replaced fuel filter and catalytic converter.
Need change sparkplugs and check your fuel pump pressure when is hat the engine
Posted on May 13, 2014
Check the cable that connects the Gas pedal to the throttle plate in the intake manifold. Cable could be streched or breaking and not opening the throttle plate all the way.. another easy thing to look at is just past your air filter is the Mass Air meter.. open it up (take the large hose off) and clean it. there is special cleaner for this job.. its a spray available in any auto parts store. You replaced the CAT.. is there any other possible blockage in the exhust system.. this is a classic symptom of a blocked exhaust. To check this you would unbolt the front part of the cat and run with a open exhauset just to see if it corrects problem. Very loud but a last ditch choice. Check air filter?? I have seen rats nests in airfilters in the winter.. this usually causes the engine to smoke from too rich mixturee.. but the fuel inj systems are so smart now they might adapt to a blocked air filter and reduce the amount of fuel.= going slow.
Posted on May 13, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1984 nissan 4x4 truck
hi if thats the case it is afuel problem
# replace fuel filter
# remove fuel from pump the one that goes back to the pump remove fuel cap blow threw with compressed air to make sure there is no blockages
# if u can get a fuel pressure gauge check fuel pressure it should be about 4-6 psi
# on the carby fuel where it connects to the carby there should be a bolt take it of and from memory there is a little screen filter check if its blocked and clean blow air into the carby fuel inlet
# on the bottom of carby body midway is 2 nuts facing down one has the main jey in it when u take this off all the fuel should come out of the carby place air nozzle in hole and hit it with high pressure to clear
see how u go mate
Posted on Dec 21, 2008
these kind of behavior generally happens,when the tappets clearance is less than the specified .that means when the engine heats up valves elongates,and the gap reduces,resulting valve leakage,improper combustion,power drop, emission, missing etc....set the tappets
Posted on Mar 03, 2012
SOURCE: Will the MAF sensor cause
Good Evening, if your truck runs fine at idle it would make me wonder about the mass air flow sensor, however when you first start it your idle air control sensor should open up and let your vehicle to idle up to warm idle and then back to normal. So there are a few things to check.
Posted on Sep 15, 2010
Tips for a great answer:
Sep 23, 2014 | 1994 Volvo 850
Aug 24, 2014 | Cars & Trucks
May 11, 2014 | Nissan Hardbody Cars & Trucks
Dec 05, 2009 | 1994 Nissan Altima
Jan 24, 2009 | 1993 Nissan Pickup
Nov 24, 2008 | 1994 Ford F150 Styleside Supercab
May 19, 2008 | 1994 Nissan Pickup
111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: