Question about 2000 Kia Sportage

1 Answer

How do I remove up and down window button cover

Posted by on

  • rosiesmith14
    rosiesmith14 May 12, 2014

    I have a window that only goes up and down when I jiggle the button, and one window will not move at all.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Kia Expert
  • 146 Answers

If it's the switch on the drivers door you need to remove the Philips screw from the interior cup/handle and remove that piece then you should be able to use a flat pocket screwdriver to remove the switch assembly. If you have the new part take it out of the box and look it over you should see a gold retainer tab. try to line up the screwdriver up the old part and pry it out then all you'll have to do is unplug it and it's removed.

Posted on May 15, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacs battery on merceds b 200


The battery is located on the floor on. I believe you are a left hand drive one, should be on the driver's side. To confirm the mud flap on the driver side and there you see a cover with plastic bolt. If is there use a screwdriver and turn that plastic screw anticlockwise and lift up the cover. There you will see the battery. Using a spanner according to the terminal bolts size loose and remove them from the battery, by the side of the battery there is a bolt with the bracket holding the battery tight - unscrew and remove it allowing the battery to come out. Renew the battery, put first the negative terminal and then the positive, tight the terminals and battery bracket as well. Turn ignition on to confirm that you have all the lights in the dash. (Due to the removal of the battery all the door windows are out of program). As you seating on the driver seat with the ignition on, go on the door has the main control for the windows, starting first with the driver and front seat passenger windows, if are close bush the buttons to go down, keep them pressed when the windows are completely down for a second, then pull the buttons up for the windows to come up together. When they are up and close keep the buttons press for a second. This should be done three times. The same you should do for the rear windows as well.
Good luck!

Dec 11, 2013 | Mercedes-Benz B-Class Cars & Trucks

1 Answer

Remove car door panel on mercedes c220


Hello, The handle splits apart and reveals 2 screws. There is one more screw inside the SRS badge.

There are 2 more screws on the door lock. When all of these screws are out the door unclips from the bottom up and then the top edge is resting in the window rubber. This comes out vertically. The window should be down.

You then either unclip the window button or pop the button out. You will raise the window but the real challenge is to remove the dust cover without destroying butyl bead that holds it on.

Thanks

Aug 14, 2011 | Mercedes-Benz C-Class Cars & Trucks

2 Answers

The passenger window doesn't work properly on my 2006 F-150. It goes down, but when i push the up button it goes up really slow. How can I fix it?


make sure the contacts are tight at the slider arms, and the arms ( the slides the window sits in ) are aligned , and shift in these can make going up harder since its lifting the weight of the window glass , to get to these items your going to have to remove the inner door panel

May 14, 2011 | 2006 Ford F-150

1 Answer

Backdoor window & wiper want work as well remote lock want as well


back door hardware is connected throug a control box wire attahced to the door; so if problem with remote it is a different problem.... if the back window try this home made solutiojn:
remove the back door cover, let an assistant hold down either the remote button or the panel switch down, and hit the window motor gentle-wise!!! it should work
good luck

Oct 21, 2010 | 2006 Toyota Sequoia

1 Answer

Driver side window will not come down. when I press button to roll down dome light in car comes on.


The most common problem with Cabrio auto windows is the Window regulator. Each window has it's own. My wife also owns a 2002 Cabrio, that had a mis-behaving window driver window and the passenger was locked in the up position. After inspecting the drivers window, I found one of the cable roller guides was broken, causing the cable to snag when using the window open / close, and resulting in the window seeming to have a mind of it's own. I had a local garage order the regulator for me, and then I disassembled the drivers door and installed the new regulator (problem is now solved).
The passenger window was bound up, I also had to remove the regulator and let loose the tension in the cable system by carefully removing the cover over the cable roller. This window works fine now as well.

Oct 13, 2010 | 2002 Volkswagen Cabrio

1 Answer

2001 Pontiac Grand Prix 2 dr GTP My driver side electric window will go down only if I roll down the passager side at the same time. It is then difficult to roll up, I have to prees hard on the driver...


You will have to remove the button cover with a flat tool such as a screw driver, and use alcohol with a cotton swab to clean the electrical contacts.

Oct 02, 2010 | 2001 Pontiac Grand Prix

1 Answer

Passenger side front window does not work.


Yea your right on that one, but to be sure test the regulator connector with a test light to be sure their is power getting to the motor. to remove the panel their will be a few screws around the panel and some snap clips on the back side of it, disconnect any connectors and be careful with the plastic clip for the door handle.

May 03, 2010 | 2005 Dodge Grand Caravan

1 Answer

Need to reset the soft top on a maserati spyder


Manual roof procedure
The procedure in the manual is just for closing the top.
A) Turn key to OFF for several seconds to bleed off hyd pressure.
B) Turn key to MAR (full electrical, but before start)
C) Remove cap on bulkhead behind the right-hand seat and use flat head screw driver to unfasten the hyd unit valve in order to relieve the oil pressure in the circuit.
D) Remove the cap on the bulkhead behind the left-hand seat and using screwdriver or allen wrench press until the top covering (panel behind roll bars that covers the convertible top well) until the panel's locks are released - you may have to tap the wrench to release the locks.
E) Lift the top covering manually and keep it open while extracting the top from its well.
F) Remove top from well until the front part is near the windshield frame.
G) Lift the rear part of top (rear window) upwards and lower the top covering until the hooks are resting on their respective locks.
H) While still keeping rear part of convertible top lifted upward press Button 1 to attach the top covering locks.
Button 1 is the forward one
Button 2 is the rear one.
I) Make sure locks are fastened. if not - try pushbutton 1 again. If necessary repeat D and H
J) Rest rear part of convertible top on top of covering.
K) At front of convertible top, open (deploy) the top's hooks by using allen wrench to turn the pin mechanism. (located in center of front headliner)
L) Press top unto windshield frame and use wrench to lock the hooks.
M) Press the rear of convertible top, so hooks on rear top insert into respective slots and press Button 2 to secure.
N) Keep Button 2 pressed until hooks properly fasten.

If the top is still tightly latched at the front, you can just start at step "G":
While holding the back of the top in the air, and the "top cover" resting down on its "hooks", press button 1 until it seats well.
Then lower the back of the top down to mate its "hooks" and press it down while holding button 2 until the top seats well.

Sep 10, 2009 | 2002 Maserati Spyder

Not finding what you are looking for?
2000 Kia Sportage Logo

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...