Question about 2006 Hyundai Sonata

1 Answer

My car wont start after i replaced my transmission

Everything is getting power but my starter fuse inside my car, the starter is getting power, the fuse under the hood is also

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 194 Answers

If you can't hear the starter maybe the cable between the starter and battery is loose or has disconnected.
If the starter is actually working and turning over the engine you need to make sure it is not an ignition or fuel problem. Since your care just had a major repair make sure all cables have been securely reconnected.

Posted on May 11, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

darjr
  • 378 Answers

SOURCE: dome lights won't come on

Check it very careful use a test bulb to verify the fuse connection, sometimes visual checking alone is not enough.

Posted on Jun 01, 2009

  • 15 Answers

SOURCE: car won't start without jumping even with a new

could be the starter is drawing to many amps and needs to be replaced.

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford e350 5.8 liter wont start


There is a fused link in the positive battery cable.It most likely blew out.Repair cable or replace.I would replace it.

Dec 28, 2012 | 1989 Ford Econoline

2 Answers

1994 pontiac sunbird;i turn key on everything inside works.turn key over i get nothing


could have faulty starter or starter solenoid.hook test light make you a test light with longer wires and 12 volt bulb with socket go junk yard find good bulb with socket.hook test light to starter and see if test light lights up if so your starter or starter solenoid has a open winding. if test light dont light up could have blowed fuse to transmission neutral switch or neutral switch could be bad.try to start vechicle in neutral if vechicle starts your transmission neutral switch out of adjustment or neutral switch faulty check make sure wires going to neutral switch is damaged.

Sep 09, 2012 | 1994 Pontiac Sunbird

1 Answer

F150 wont start replaced pump module on rearchassis now eng wont crank


Sounds like an issue with the fuse for the starter motor relay, or the starter motor relay itself.

The fuses for the starter system are F101 & F102
The starter motor relay is in the cab fuse panel.

The other thing to check if turn the key from off to run, press and hold the brake, and shift the truck into neutral and try starting with the brake still applied. This is testing the DTR ( Digital Transmission Range ) Sensor on the transmission. Should have no impact on what you did, could just be coincidence that the no crank no start issue just started.

Jan 11, 2011 | 2005 Ford F-150

3 Answers

Everything has power when i turn the key to the on position but when i turn the key to start the truck, nothing happens. headlights dont dim or anything and everything still has power. all fuses are...


When you crank the engine are you getting a full 12 volts positive at the solenoid switch on the top of the starter?

Have you got a full 12 volts negative to the switch?

Also, check the earthing strap from chassis to engine is good.

Regards

Lloyd

Aug 20, 2010 | 1993 Isuzu Rodeo

1 Answer

1500 Ram wont start, no crank no click nothing. Air cond and dash lights work just fine just wont start. Battery is ok tried to jump, no luck, put in different battery no luck.


First thing is to check is the ignition fuse/relay under the hood for a blown fuse or bad relay. If everything is ok then set parking brake with truck in park/netural and have someone to turn the ignition over to start and at the same time use a test light to check for fire at the starter solenoid. If no fire then the ignition switch or netural switch on transmission is causing the problem. If you do have power to the starter solenoid then the problem would be either the solenoid or the starter drive locked up on the flywheel. Be sure to remove the negative wire from the battery if you need to remove the starter. Hope this will help you.

Jun 02, 2010 | 2008 Dodge Ram 1500 2WD

1 Answer

Wont start locks wont work had transmission cooler/line replaced


check wiring and connectors at battery and fuses look at starter and see and feel if its loose or not sitting right if it is notify shop dealership where work was done possible did not install starter correctly when work on transmission was done grinding, starter not meshing correctly with fly wheel

Nov 25, 2009 | 1998 Chevrolet Cavalier

1 Answer

Batery is good new starter new starter relay wont start dash comes on when key is turned but wont turn over or even click its like there is no power to starter it all starter when i jumped my lawn mower i...


did you check main fuses under hood, and also check for brunt fusible links,(looks like wire but inside bruns like a fuse).if everything is good then next step is ignition switch. hope this helps.

Oct 12, 2009 | 1996 Dodge Neon

2 Answers

I just put a new starter in my car but it wont start the light and everything are coming on but it just wont start


check battery power going to starter. also check battery power going to ignition switch.

Aug 28, 2009 | 1991 Honda Accord

1 Answer

1995 nissan pu wont start... everything turns on


check for power to the starter at the starter's connectors while you have someone turn the key. If there is power, change the starter. If not check your ignition switch, (manual trans)clutch pedal switch, and starter fuses/relays. Hopefully this helps

Jul 19, 2009 | 1995 Nissan Pickup

2 Answers

Car wont start


check nutral safety switch,you have power on the starter, now is ignition to starter power

Apr 11, 2009 | 1993 Toyota Camry V6

Not finding what you are looking for?
2006 Hyundai Sonata Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...