Question about 2005 Chevrolet Silverado
These trucks are equipped with an electric vent door motor known as a vent actuator. I believe the actuator that controls this vent is located behind the dash on the driver side.
Posted on May 11, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 Silverado 2500HD a/c is
Sounds like it is going through the recalibration process. We run into this issue when replacing the batteries on these. In the underhood fuse block there is a HVAC fuse. Pull it, wait 30 seconds, put it back in, and turn the key to the run position. You should hear the vents moving around. wait for about a minute or so, do not touch anything. If the self test/calibration passes everything will return to normal. If after several attempts you can not get it to return to normal than there is a problem with the HVAC system that will need to be resolved.
Posted on Sep 26, 2010
SOURCE: 2004 chevy silverado 1500 -
This may be an issue with the actuator wiring harness.There is a known issue of the actuator harness rubbing on an instrument panel brace. This appears to be located behind the glovebox. Would check and make sure this is not the issue you are having. Locate the HVAC actuator harness contact point shown by the arrow in the above illustration. The illustration is of the instrument panel with the instrument panel compartment door opened and folded downward. The actuator harness is located in the left side of the opening in the instrument panel.
Posted on Sep 25, 2010
There is a black vacuum hose in back of the glove box toward the top connected to a gray hose about 1/8 thick.You need to check to see if there is vacumm there.If yes then you need to take the bolts off to be able to tip the dash back enough to see all the vacuum hoses.Make sure they are all connected.It was alot of bolts but its is the best way.I had a hose off going to one of the acuator doors.Glued it back on and works great
Posted on Jul 17, 2011
Tips for a great answer:
Aug 06, 2015 | 2004 Chevrolet Chevrolet Silverado 1500...
Jun 06, 2012 | 1991 Chevrolet Silverado 2500
Sep 26, 2010 | 2004 Chevrolet Silverado 1500 Crew Cab
Feb 20, 2010 | 2004 Chevrolet Silverado 1500 Crew Cab
Feb 11, 2010 | Chevrolet 1500 Cars & Trucks
Sep 18, 2009 | 2005 Chevrolet Silverado
Sep 05, 2009 | 2004 Chevrolet Silverado
Aug 31, 2009 | 2003 Chevrolet Silverado 1500
Jan 18, 2009 | 1997 Chevrolet K1500
181 people viewed this question
Usually answered in minutes!