Question about Hyundai Motor 1995 Accent

Open Question

Clutch fluid empty leak replace - Hyundai Motor 1995 Accent

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 279 Answers

SOURCE: clutch fluid began leaking slowing at first but

good possibility you have a faulty clutch slave cylinder thats leaking,you may wanna have a repair shop take a look at it to verify where the leak is

Posted on Jan 21, 2010

Ad
  • 5488 Answers

SOURCE: clutch fluid leak

Well, it's something any everyday do it yourselfer would take on. ( What portion of the 99% are we?)
The important thing is to stop the leak. It is the reason you are grinding gears (cringe!), and could quickly lead to expensive damage. Clutch (or brake) fluid is a hydraulic fluid, which works under pressure. A leak lowers pressure and reduces the effectiveness of your clutch. So to avoid the cost of a new or rebuilt transmission, stop the leak!
You need a few tools, of course....honestly, let a mechanic review your work after you fix the leak, because likely the clutch system will need to be bled down at the transmission to restore it to full efficiency.

Posted on May 27, 2012

  • 49948 Answers

SOURCE: 2000 hyundai elantra leaking clutch fluid, when low or empty lose clutch, then refill clutch works fine, leaking under car

replace the clutch slave cylinder as the cup in front of the piston has failed or the cylinder bore is badly marked

Posted on Mar 17, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is Clutch pedal is going straight to the floor?


you have a leak on your clutch master you need to replace probably the leak started small and now its worst

Jun 09, 2014 | 1994 Mazda 323

2 Answers

2000 hyundai elantra leaking clutch fluid, when low or empty lose clutch, then refill clutch works fine, leaking under car


The clutch hydraulic system is very simple, just 3 pieces. There is the clutch master cylinder with attached fluid reservoir-mounted on the firewall, there is a steel line from the master going down to the transaxle bell housing, and there is the clutch slave cylinder on the bell housing that the steel line connects to.
If yours is leaking under the car, it is probably the slave cylinder, either that or the steel line. Either one should be easy to replace.

Mar 17, 2014 | Hyundai Cars & Trucks

1 Answer

Cluch pettle dont work just go to floor


Either the upper or lower clutch kit is leaking hydraulic. Replace the clutch kit. You may as well check if the clutch fluid reservoir is not empty of fluid.

Dec 22, 2012 | 1994 Isuzu Rodeo

1 Answer

The cylinder was empty this morning in the 1990 pathfinder for the clutch, pedal went to floor, filled master cylinder and holding fluid but pedal is still on floor. What to do....


you need to inspect the clutch hydraulic system to look for a leak.check in the truck were the master cylinder bolts to the firewall as if the master is leaking out the back it will show up the leak in this area.check around the master under the hood to see if there are signs of it leaking.check at the transmission were the slave cylinder is as this is another place they leak.if you have to fill the master because its empty there is a leak somewhere.you also may need the clutch replaced as the slave cylinder moves out to adjust for wear of the clutch which will lower the fluid level but not cause it to be empty.you will have to bleed the clutch system at the slave cylinder,there should be a bleeder screw to do this.if you find the leak in the clutch system you will have to replace the system as some come complete master lines and slave.some come with just the slave,lines,master as separate components.

Jul 16, 2011 | 1990 Nissan Pathfinder

1 Answer

Its a 1989 nissan 240sx its out of fluid on the clutch resivor. will adding fluid bring the pedal back to operating?


If with brakes, your fluid is low, this is usually an indication you need to replace the pads/shoes or you have another problem, possibly a leak, the same goes for hydralic clutch systems. You should never have to add brake or clutch fluid.

You can add fluid the the clutch master cylinder but if it is completely empty you will probably need to bleed the slave cylinder. You need to check for any leaks and also you might be on the verge of a clutch replacement. I cant see the car so I am giving you general info.

Mar 13, 2011 | Nissan 240SX Cars & Trucks

3 Answers

Mazda e2200 clutch repair: feels like I still have some kind of pedal springback, but without much force. No clutch at all. I assume it is hydraulic, but the only reservoir I see is for the brakes. That is...


Yes, hydraulic--check again--fender side of brake master. Slave is usual cause of leak that eventually causes master reservoir to go dry and start drawing air. Check slave for leak. If leaking, replace slave and bleed system. Make sure to bench-bleed slave before installation by opening bleeder and pouring fluid into line port.

jturcotte_373.gif
  1. Raise and support the front end on jackstands.
  2. Back off the flare nut on the fluid pipe to free the slave cylinder hose.
  3. Pull off the hose-to-bracket retaining clip and pull the hose from the bracket. Cap the pipe to prevent fluid loss.
  4. Unbolt and remove the slave cylinder.
  5. Installation is the reverse of removal. Tighten the bolt to 12-17 ft. lbs. (16-23 Nm).

Dec 04, 2010 | 1988 Mazda B2200

2 Answers

Clutch goes all the way to the floor without resitance on my daughters 2004 sunfire. there is fluid on the ground and when I checked fluid level it appeared to be empty


Examine carefully to locate exact point of leak. Could be the hydraulic line, a connection between line & slave cylinder or master cylinder, or a bad slave cylinder. Once you identify the point of leak, I can help you with repair info if needed.

Jun 04, 2010 | 2004 Pontiac Sunfire

1 Answer

Unsure if empty reservoir is for clutch.


If it is a bright green, it is probably antifreeze, the reservoir for that is usually around 1/2 to 1 gallon. If it is about a cup to pint size, it may be clutch fluid. It should smell about the same as brake fluid. Usually clear or brownish clear in color.

Aug 24, 2009 | Nissan Pathfinder Cars & Trucks

1 Answer

1996 chevy s-10 pickup went to stop and the clutch went to floor.Checked fluid it was empty.Put fluid in and it drained down.still no clutch


Pretty obvious you have a leak in the system somewhere...find the leak and replace bad parts, bleed as you would a brake and you should be fine.

Jul 11, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
Hyundai Motor 1995 Accent Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...