Question about 2008 Ford Explorer 2WD

1 Answer

What method of checking filters in the car environment?

Posted by on

  • 1 more comment 
  • darryl May 11, 2014

    Hi Mohammad Alghadoni, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?

  • Mohammad Alghadoni May 12, 2014

    Hi..Thanx dear

  • Mohammad Alghadoni May 12, 2014

    hi darryl i have ford explorer 2008 4x4 and 6V >>The problem is Lighting Bulb check engine computer detected after it emerged that the cause of the malfunction in the exhaust catalyst (filters Environment (My question is how can I examine the efficiency of the exhaust filters may be the cause of the sensor itself?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Master
  • 20,706 Answers

Why not scan the PCM ?
and post all DTC errors.
and all symptoms driving , idling , hot ,cold engine,, cruising and going up hills.
what engine size, V6 what size.
and THe CHECK engine bulb is only timing part of cars.
Only a real scan tool can tell you if all live and stored DTCs are clear not. post them as seen. all of them and get 100x better answers.

Posted on May 14, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

AC filter is comming out of the vents in pieces. How do I change filters

The filter is usually in the glove box environs and obviously it needs to be replaced. Enter make and model number info in google for air filter replacement and you will get your answer.

Sep 02, 2017 | AC Cars & Trucks

1 Answer

Water accumulates in my fuel filter regularly

condensation a can of dry gas added occasionally will fix the problem

Apr 16, 2015 | Cars & Trucks

1 Answer

Where are 0xygen sensors located on 2003Lincoln LS

always the Oxygen sensors is located at exhaust manifold , end
of the silence pipe ,before and after the environment filter .

Jan 16, 2014 | 2008 Skoda Octavia 1.9

1 Answer

The air condition air flow smell bad (like a mold)

What smells like mold probably is mold. This is a common problem because of the moist environment of the air conditioning system. The solution is to turn the air conditioner on max and spray aerosol antibacterial spray into the high level air intake at the base of the windshield then shut down and let it work. You may have to do this quite often depending upon your environment. Obviously, you should not attempt to do this procedure while underway.

Nov 22, 2013 | 2010 Daihatsu Sirion 1.3

1 Answer

While car is idling it has a shake and the engine service soon light brinks

If all else is good, i.e. plugs, wires, coil pack, air filter, fuel filter, fuel pump, etc. You may have a vacuum leak....

It may sound silly but the truth is rubber grommets and hose's shrink and dry out over time and the harsh environment under the hood makes it worse. Check all vacuum lines and fittings attached to the intake manifold, valve covers(pcv valve), and be sure to check for a vacuum fitting on top of the intake just behind the throttle body. Does it fit tight in the hole? You can seal loose fittings with a high-temp RTV (Red) silicone sealant/adhesive. Several small leaks add up and your engine, heat/AC, and transmission will be all to glad to tell you about it.

Aug 26, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

Cutting out like no power some times put a fuel filter on did not help

You may want to check the air flow meter, if it is dirty that can cause that issue.
the air flow meter can get contanimated by inlet air environment and Wet air filter oil, the airflow meter is the sensor in the intake hose and is very fragile, it can be cleaned by airflow sensor cleaner or break clean and letting air dry. Try that, or take to local honda dealer, you never know if there is an update to the ECU and they know the vehicles very well.

Mar 10, 2011 | 1997 Honda CR-V

1 Answer

Engine light came on .checked air filter,oil, water ,put new air filter but light still stays on

Check engine light for is a misnomer for owners. It is really the computer saying hook scanner to me soon so I can tell you my problem and then you can fix it. The problems concern the polution to the environment from your engine mandated from the government. hth

Dec 09, 2009 | 2003 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides