Question about 2004 Land Rover FreeLander

1 Answer

How do i remove outer door handle on drivers door

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Land Rover Master
  • 733 Answers

TAKE OUT THE PANEL INSIDE THE DOOR.REMOVE THE PLASTIC COVER OF THE DOOR .U WILL NOW BE ABLE TO SEE THE 2 BOLTS HOLDING THE DOORS OUTER HANDLE!! GOOD LUCK!

Posted on May 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to replace my holden barina right outer door handle since it is broken


remove the door trim and inside at the handle you will see 2-3 nuts that hold the handle in the outer skin of the door.

Mar 25, 2014 | 1993 Suzuki Swift

1 Answer

Need to intall new front exterior drivers side door handle on a 2002 Hyundai Elantra GLS


remove the interior door trim and you will see small nuts holding the handle onto the outer door skin. Remove any rods /clips and undo the nuts and the handle will come out.

Mar 18, 2014 | Hyundai Motor 2002 Elantra

1 Answer

How do you remove outside handle on driver's door on 2012 s60


On a S60, 2012, (drivers door) you first remove the plastic cover in under which you find the lock (with keyhole).
secondly, open the door and remove the 15 mm diameter plastic cover near the handle. Insert a long torx scrwdriver(T25 ?) in the
opening and while keeping the door handle "open" (this gives you the possibility to easily replace the handle later) Turn the torx until it stops
(do not use much force). Now you can pull out the metallic lock, peer
out the small white plastic under the door handle and pull out the handle. Do not turn the torx before you have replaced the handle.

In the case of back door, you start by finding the hole for the torx under the doors rubber sealing near the door handle.

Jan 08, 2013 | Volvo S60 Cars & Trucks

1 Answer

How to remove the left front outer door handle?


you have to take off the inner door panel and there should be a device that hooks up to the outer door handle. then the outer handle should come off.

Jan 25, 2011 | 2003 Volkswagen Passat

1 Answer

Open a suburban door when both handles are broke


ok easy to fix. remove door panel. when u have the replacement parts. start with the outside handle, remove the bolts, undo the bar, remove the handle. same with the inside handles

Mar 14, 2010 | 1999 Chevrolet Suburban

1 Answer

How to replace a window on a 2002 saturn sl2 with power windows. i cant get the door handle assembly off


As per the Haynes manual for your vehicle.
DOOR WINDOW GLASS-REMOVAL AND INSTALLATION:
1. Remove the door outer panal.
2. Lower the window glass.
3. remove the two nuts and one screw securing the glass.
4. Remove the glass by lifting it up carefully and rotating it inward.
5. Installation is reversal of removal.

DOOR OUTER PANAL-REMOVAL AND INSTALLATION:
1. Remove door trim panal.
2. Remove the outside mirror. Remove the foam block from the mirror opening.
3. Remove the outside door handle.
4. Open the door and pry thhe outer sealing strip out of the window glass opening.
5. remove the door panal screws.
6. Detach the front and rear of the outer panel, then lift it toward the rear to remove it.
7. Installation is the reverse of the removal procedure. Apply thread locking compound to the panel retaining screws.

OUTSIDE DOOR HANDLE-REMOVAL:
1. Pull handle out and puch the centers of the retaining pins through the pins, then remove them and detach handle. (These pins are located underneath the handle.

Hope this helps, let me know if you need any other help.

Feb 06, 2010 | 2002 Saturn L-Series

1 Answer

Bmw 525 4 doors,how to remove rear door outer handle


has to remove the inside panel door and remove the clip inside to open the handle cover then u can see the two nuts and remove them

Jan 06, 2010 | 2002 BMW 5 Series

1 Answer

I have a susuki forenza and I need to replace the driver's side door handle. I already have the new part (door handle).


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the inner door handle and replace with new one. If it's your outer door handle, pull back the weather seal and disconnect the linkage to the outer door handle and then remove the bolts securing the outer handle to the door

Oct 23, 2009 | 2006 Suzuki Forenza

1 Answer

Replacing front passenger window motor/regulator... Got inner door panel off, outer door skin bolts out, but don't know how to take off the outer door handle so the door skin can come off. Not very...


I don't think you need to remove the outer door handle.I hope this helps and google search a bit on it and you will get the answer.According to my experience,to replace the window you don't need to remove to outside door handle..Hope this helps.

Jun 16, 2009 | 2000 Saturn Ls 4dr Sedan

1 Answer

Broken drivers side outer door handle removal


You have to pull the interior door panel off, remove the two fastners that hold the exterior handle on....disconnect the two plastic clips for the lock rod....reinstall in reverse order.....have some metric sockets on hand and an extension.

Mar 26, 2009 | 2003 Ford Explorer

Not finding what you are looking for?
2004 Land Rover FreeLander Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...