Question about Cars & Trucks

Open Question

How do i remove coil pack from 2008 mazda cx 9 3.7 ?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1348 Answers

SOURCE: where's the engine air filter in a mazda cx-9

follow the air intake pipe back from the throttle body after removing the top engine cover.you will see the filter housing.

Posted on Sep 06, 2009

theautoguy
  • 69 Answers

SOURCE: mazda cx-7 2008 left headlight stopped working,

check the wiring from the headlight. You want to find the ground wire which is usually a black wire thats secured to some metal part of the car. Basically just check that all your wires are in tact and tightly secured. A bad ground is a very common electrical problem.

Posted on Jan 09, 2010

alicantecoli
  • 22095 Answers

SOURCE: Is the spare tire on a Mazda CX-9 full size that

have a look at the speed rating on the tyre ,like say 195-65-15 91v ,well check the speed rating at the end ,91v and if its rated higher than a H then yes it is

Posted on Jul 16, 2010

  • 172 Answers

SOURCE: On a 2008 Mazda CX-7 Where is the Oil filter

Unless the CX-7 is different from all other cars I've driven, the filter is a cylindrical painted metal can, about 3 or 4 inches in diameter and 3 to 6 inches long. It can any color, depends on the brand. Go to an auto parts store and ask them for one for your vehicle, and look at it. Different vehicles take different sizes.
It is almost always located on the side of the engine block, between the oil pan on the bottom and the cylinder heads on the top. (You generally have to put the car up on ramps to reach it from the bottom, but I assume you are changing the oil, so you have to get under it to remove the oil drain plug as well.)
When you remove it, be careful for oil that may leak out of it as you are unscrewing it.

Posted on Sep 05, 2010

  • 81 Answers

SOURCE: How do I replace a battery for a Mazda CX 9

a flat head should be all you need to pop open the remote and re place the battery

Posted on Feb 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the entire headlight assembly on a 2008 Mazda CX 9.


There are a few installation bolts that are accessible from the top and side but you will need to remove the entire front bumper to access two of the lower ones. Here are some pics from the factory manual. First shows location of the headlight bolts and fasteners. Others show how to remove the bumper. 10mm socket should handle all the bolts you need to remove. Disconnect the battery prior to starting and headlights off. HID headlight voltage is around 25,000 volts so you want to ensure no power to the system before performing repairs.
25934749-fb0dbpuz0qoml01jiatehqdr-5-0.jpg

25934749-fb0dbpuz0qoml01jiatehqdr-5-2.jpg

25934749-fb0dbpuz0qoml01jiatehqdr-5-5.jpg

Oct 31, 2015 | 2008 Mazda Cx 9

1 Answer

Hi I have mazda cx 9 model 2008 having problem oli mixing in radiator water mean coolant bottle gave oli mix please let me know the reason....smoin99@hotmail.com


Your head gasket has a leak & it will need to be repaired at a mechanics with costs starting at around £700.00 Or $1200.00

Nov 11, 2014 | 2008 Mazda Cx 9

1 Answer

How do you r&r coil pack ?


If it's one on the aft bank of cylinders, you have to remove the upper intake manifold (don't be scared) to access the 3 rear coil packs. The manifold should have 3 blue figure 8 looking rubber gaskets which CAN be re-used if necessary (I always order and replace mine just because they're cheap). Anyways, once the upper manifold is off, you can access the rear bank coil packs. Now is a GREAT time to replace the aft bank plugs with new and replace all 3 coil packs with new. Reassembly is reverse of disassembly. If you're mechanically inclined you can have the rear plugs and coil packs done in an hour. Then you're left with the 3 easy ones on the front side of engine! Half hour max for those 3. Make sure you use some quality iridium plugs! Any questions, email me @ dmac1269@hotmail.com.
Good Luck,
Dave

May 11, 2014 | 2008 Mazda Cx 9

1 Answer

2008 Mazda 9 Fuse Box DIagram


On this website, you find fuse box diagram and description

Mazda 6 (2006 - 2008)
Mazda 6 2006 2008 fuse box diagram Auto Genius

Mazda CX-9 (2007 - 2010)
Mazda CX 9 2007 2010 fuse box diagram Auto Genius

Dec 31, 2012 | 2010 Mazda CX-9

1 Answer

Broken clip on spark plug connector cx9


You must see the dealer for new retainer.

Aug 20, 2012 | 2010 Mazda CX-9

1 Answer

MAZDA CX-9 P0354 CODE


Cylinder 4. Each cylinder has it's own coil above the sparkplug.
If you have a misfire, it's probably a bad coil. But if it's an intermittent misfire, it may be the wiring to the coil. If it's intermittent, start the car and wiggle the wires to that coil. If you cause a misfire you need to check the wiring to the coil.
Goode luck.

Nov 29, 2011 | 2008 Mazda Cx 9

2 Answers

How do I replace a battery for a Mazda CX 9 keyless remote? I don't know how to get the old battery out.


a flat head should be all you need to pop open the remote and re place the battery

Feb 03, 2011 | 2008 Mazda Cx 9

2 Answers

How to program smart key for Cx-9


hloo ihave benz smrt forfour at home showing key i dash brod pls can some body help me

Feb 20, 2010 | 2008 Mazda Cx 9

1 Answer

Where's the engine air filter in a mazda cx-9


follow the air intake pipe back from the throttle body after removing the top engine cover.you will see the filter housing.

Sep 06, 2009 | 2008 Mazda Cx 9

1 Answer

Mazda 2008 CX-9, hatch not closing with door button or Smart card key. Hatch appears to close, but then gets stuck.


it sounds like the closer motor is giving you problems. you will need to take it to the dealer so the motor can be replaced.

Aug 13, 2009 | 2008 Mazda Cx 9

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...