Question about 2003 Jeep Liberty

1 Answer

I am installing a rear view camera on my 2003 liberty. Everything is installed but I don&it know which wire in the rear tail light assembly to connect to. I need to know what the wire color is fo

Wire color of the rear backup light of the 2003 liberty

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

The FSM show this.
and maybe , alldata.com

what makes you thing your cars harness is right for this.
jeep.com see parts list. and look for free.
http://www.factorychryslerparts.com/

Posted on Jun 03, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 93 Grand Cherokee no rear park lights

2000 grand cherokee no rear park light when the park light come on no brake

Posted on Nov 06, 2008

wikkidd420
  • 96 Answers

SOURCE: I need wiring information to go from my Jeep to my trailer's lights

Easiest way to do this is to purchase an in-expensive test light from your autoparts store, the kind that clips to a ground and has a sharp end and a light. Clip the wire onto a frame bolt then turn the taillights on. Probe the wires coming from the light assembly until the tester lights up. You cand do the same thing for each function, just do them one at a time (blinker left, blinker right, brake, ect..)
Hope this helps :)

Posted on May 03, 2009

rogrrabbit
  • 986 Answers

SOURCE: need a tail light wiring diagram for 2005 Jeep Liberty

I advice you don’t cut into the wiring harness but get the proper kit that is plug and play.

Posted on Jun 14, 2009

ZJLimited
  • 17970 Answers

SOURCE: 2003 Jeep Grand Cherokee, how to replace rear tail light

I thinking tha you are fix the CHMSL (Central High Mounted Stop Light); review the Service Manual, the section ZJ-Secc-8L-Lamps (page 7, fig. 11).

I hope help you with this, good luck (remember rated this help).

Posted on Sep 16, 2009

  • 30 Answers

SOURCE: How to remove and replace tail light assembly on

There is 2 screws located on the side when you open your tail gate by the tail light. remove these 2 screws and pull the tail light out and disconnect the wire connector. Hope this helps.

Best of luck

Posted on Jun 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace left rear brake light bulb


1) Open trunk
2) Remove small round plastic access panel with a flat tip screw driver by prying open
3) Remove flat tip screw holding tail light assembly
4) Remove tail light assembly by pulling outward, careful not to break plastic guide/nub
5) Disconnect wiring connectors
6) Remove plastic housing access plate on back of tail light assembly by twisting/turning tabs until they click and then lift access plate from tail light assembly
7) When viewing the the bulbs, the turn signal bulb is the bottom left bulb
8) Install in reverse order, ensuring tail light seal seats properly during installation

Oct 13, 2014 | 1999 Audi A4

1 Answer

Need to replace stop light


Tail Lamp Assembly Removal & Installation To Remove:
Tail lamp assembly removal and installation gm-06-00-1645.gif

  1. Remove the tail lamp assembly retaining screws from the body.
  2. Release the locking pins by pulling the assembly directly rearward.
  3. Disconnect the tail lamp assembly connector.
  4. Remove the tail lamp circuit board from the assembly.
To Install:
  1. Install the tail lamp circuit board into the assembly.
  2. Connect the tail lamp assembly connector.
  3. Push the assembly directly forward into the opening to engage the locking pins.
  4. Install the tail lamp assembly retaining screws into the body. Torque the screws to 17 in-lb (1.9 Nm).
High Mount Stop Lamp Removal & Installation To Remove:
CAUTION
Raising the liftgate with the liftgate window open can damage the high mount stop lamp, liftgate hinges, and the liftgate window.
  1. Raise the liftgate.
  2. Lower the rear of the headliner by removing the rear headliner pins.
  3. Disconnect the high mount stop lamp connector.
  4. Remove the high mount stop lamp grommet from the body.
  5. Lower the liftgate.
  6. Open the liftgate window.
  7. Remove the high mount stop lamp retaining screws from the liftgate window molding.
  8. Remove the high mount stop lamp from the vehicle.
To Install:
  1. Place the high mount stop lamp onto the vehicle.
  2. Install the high mount stop lamp retaining screws into the liftgate window molding. Torque the screws to 22 in-lb (2.5 Nm).
  3. Close the liftgate window.
  4. Lift the liftgate.
  5. Install the high mount stop lamp grommet into the body.
  6. Connect the high mount stop lamp connector.
  7. Install the rear of the headliner by inserting the retaining pins.
prev.gif next.gif

Oct 18, 2010 | 2004 GMC Envoy

1 Answer

What do I need to unscrew in the trunk to change the reverse light in my 01 chevy impala


Tail Lamp Assembly Removal & Installation To Remove:
  1. Open the rear compartment.
  2. If equipped, disconnect the cargo net.
  3. Remove the wingnut and pull back the rear compartment trim panel.
  4. Remove the wingnuts from the tail lamp assembly.
  5. Remove the tail lamp assembly from the rear body panel.
  6. Disconnect the electrical connector from the tail lamp assembly.
  7. Remove the tail lamp socket by turning counterclockwise.
  8. Remove the side marker lamp socket by turning counterclockwise.
To Install:
  1. Install the side marker lamp socket by turning clockwise.
  2. Install the tail lamp socket by turning clockwise.
  3. Connect the electrical connector to the tail lamp assembly.
  4. Position the tail lamp assembly to the rear body panel.
  5. Install and secure the wingnuts that attach the tail lamp assembly to the body panel.
  6. Position the rear trim panel to the rear compartment. Install and secure the wingnut.
  7. If equipped, connect the cargo net.
  8. Close the rear compartment.
prev.gif next.gif

Oct 18, 2010 | 2001 Chevrolet Impala

2 Answers

Tail Light Removal on 03 Charade


Daihatsu Charade EL 2003 rear lens removal. Open the tailgate and remove the two bolts securing the lens assembly. Then get a good hold of the lens and pull out. You need to pull out the whole lens assembly since there are three plastic protruding 'clips' on the side along the lens. Please view attached pictures. Then turn the bayonet bulb holder, replace the slide on type bulb and reassemble everything back in place.
4_18_2015_5_22_46_pm.jpg4_18_2015_5_22_47_pm.jpg

Apr 17, 2010 | Daihatsu Charade Cars & Trucks

1 Answer

I would like to know how to remove my 03 lincoln aviator tail lamp as I need to replace it. Thank you..


here's mountaineer, it should be similar

SECTION 417-01: Exterior Lighting 2002 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Rear Lamp Assembly —Mountaineer Removal and Installation
  1. Raise the liftgate and remove the rear lamp assembly screws.
  1. Remove the rear lamp assembly.
    • Disconnect the electrical connectors.
  1. To install, reverse the removal procedure.
    • If necessary, install new tail lamp bulbs.
8966cfe.gif

Aug 01, 2009 | 2003 Lincoln Aviator

1 Answer

How do you change tail lights for the 2003 passat


Rear Turn Signal, Brake and Parking Lights Removal & Installation To Remove
  1. Remove or disconnect the following:
    • Harness connector
    • Combination nuts
    • Lamp and its assembly toward rear
To Install:
  1. Install or connect the following:
    • Lamp and its assembly into position
    • Combination nuts; torque to 35 lb-in. (4 Nm)
    • Harness connector
This is the only thing the tech manual says.

Jul 22, 2009 | 2003 Volkswagen Passat

1 Answer

Need a tail light wiring diagram for 2005 Jeep Liberty


I advice you don’t cut into the wiring harness but get the proper kit that is plug and play.

Jun 11, 2009 | 2005 Jeep Liberty

2 Answers

Need help for rear tail light assembly on my 2003 trailblazer


Most of the time you can simply remove the tail light assembly from the car pretty easy and just a few screws. If it sdoes not have the screws going through the front of the housing then its rear mount and must be done by lifting the tailgate to get access. Once in the vehicle you should beable to remove the plastic housing covering up the assembly from the inside. Remove the 3-4 screws or bolts and the tail light assembly. Install the new one just the reverse. Pretty easy just take your time.

Joe

May 28, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

How to change tail light bulb in 2003 lincoln ls


I can provide 2002, don't have 2003. may be similar. please rate as solveed problem if this is what you needed.

SECTION 417-01: Exterior Lighting 2002 Lincoln LS Workshop Manual
REMOVAL AND INSTALLATION Lamp Assembly —Rear Removal and Installation
  1. Remove the luggage compartment door trim panel.
    1. Remove the 13 pin-type retainers.
    1. Remove the luggage compartment door trim panel.
93ced34.gif
  1. Remove the rear lamp assembly.
    1. Disconnect the electrical connectors.
    1. Remove the nuts.
    1. Remove the rear lamp assembly.
    • If necessary, install new bulbs.
5f6d88b.gif
  1. To install, reverse the removal procedure.

Mar 22, 2009 | 2003 Lincoln LS

Not finding what you are looking for?
2003 Jeep Liberty Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...