- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Possibly the washer pump isn't working or the switch for it isn't working. It should be possible to unplug and straight wire the pump just to test it to see if it will operate is it gets power. A test light a the washer pump will tell you if it is getting power when the washer button is pressed.
I would be looking for where the power wire to the pump could touch the earth wire or any earth point near the washer pump check the actual connection on the pump for the terminals touching .
really?! the water pump?! the water pump has nothing to do with your wipers it is part of the COOLING system. as for your issue...it could be a short in the wiper/signal arm in the steering column, or it could be the motor in your washer fluid bottle. the motor is what pushes the fluid through to your windshield and if its gone bad it will blow your fuses as well. i would start with the washer fluid reservoir motor and go from there
Is your wiper fluid level good?Look for leaks at pump,it's connected to container,also check your hoses leaving pump to windshield,could be loose or binding.
could be the washer motor. have someone hit the switch while you listen at the pump to see if it is making noise. also check to see if you have voltage at pump. it could be stuck or corroded.
the pump is located in the bottom of the washer fluid container,check to make sure all the hoses are connected first, sometimes when low on fluid the pump needs to be primed.if you need more help get back to me as i strive to be the best, Please rate my fix?
remove the hose from the wiper arm and see if when you push the washer button that the fluid comes out the hose,if it does the sprayer nozzel is plugged if not replace the pupm
test at the pump, there is voltage when you activate the switch(connectors removed from the pump),voltage at the connectors?the pump went south....no voltage?fuse blown!
×