Question about 2002 Chevrolet Express

2 Answers

I just went to change the oil and transmission oil and now my milage and park, neutral, reverse, drive light dont turn on lite went out i checked to fuses but there all good what happen?

Posted by on

  • torresasunci Jun 23, 2009

    what does the dash module had to do with a tune up or transmission filter & oil change have to do with it what did they touch & should i make them fix it since it came out after doing the oils change cuz i ran to the store yesturday and once i drove up to park the car just stop on me , it did turn back on but its a lil shaky now

  • torresasunci Jun 23, 2009

    ur the SH@t Thank u so much!!!!! I went back to Valeros and told them about ur response they of course said they check on that and did everything right i made sure they re did the job and they found out that the guy that did the job did pinch one I love it when a guy knows there job where can i go to pay u on all my car maintanace needs?for my 2002 Chevy express 3500Van

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 199 Answers

You knocked a cable harness loose reseat all harness back together that you may have come in contact with make sure that you did not pinch one.

Posted on Jun 23, 2009

Testimonial: "Chrisbock was absulutely correct!! this guy know's his profession THank U! lots of LovE!!"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

Well based on the question,I'd have to say you ran into a wierd stiuation. The dash module probably went bad at the same time you did your maintainance.

Posted on Jun 23, 2009

  • Pete MacSparran
    Pete MacSparran Jun 24, 2009

    Lol,we get paid once in awhile here. Ask again if you have a problem.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2006 mitsubishi galant es. I was recently in a rear end collision. The following day my brake lights went out. A couple hours later while reversing out of a parking spot, I went to put my car in...


here is what the code means.
http://engine-codes.com/p0705_mitsubishi.html

P0705 Mitsubishi Description The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM).


When is the code detected? The transmission range switch detects the selector lever position and sends a signal to the TCM.


Jun 27, 2014 | Cars & Trucks

1 Answer

2007 Hyundai Santa Fe 2.2 Diesel, transmission went into neutral while driving.


Check transmission fluid level if low on fluid it will suck air and transmission forward clutch can not apply. If fluid is full and clean looking RED in color shift control solenoids are the problem and internal. BROWN and BLACK fluid indicates the forward clutch was slipping and now has no holding power for movement. this case the transmission needs reconditioning.

Nov 07, 2013 | Hyundai Santa Fe Cars & Trucks

1 Answer

1999 civic auto transmission problem, won't catch gear while running


Check your input or output sensors on top of tranny. Check engine light?

Apr 06, 2017 | 1999 Honda Civic

1 Answer

About 5 years ago my 95 buick skylark transmission went into safe mode for some reason. it still had park, reverse, neutral, but when put it into drive it would go into 3rd gear and stay there. It was...


Some issues with the engine or trans, can cause a third gear start (limp home mode) Dont get to happy it did not fix its self for good someone with a code reader might be able to steer you in the right direction ( A lot of codes get stored in the computer that never turn on the check ending lite ) Good Luck

Aug 26, 2010 | 1995 Buick Skylark

1 Answer

Back up lights won't turn on when in reverse


Possibly you have a bad neutral safety switch, or the reverse lite switch @ the trans. Get a test lite @ a parts store. Check all the fuses, then turn on the key to the run position (don't start the engine), set the parking brake! Put the car in reverse and check for power @ the lite socket. If you have power, change the bulbs. You'll have to get deeper into the elec. system if there's no power. Good luck.

May 27, 2009 | 1998 Toyota Camry

1 Answer

During driving the transmission switches to neutral (Lexus RX300)


Your tranny need to be repaired at once. The tranny is slipping. Some Lexus owners do have the similar problem including myself.

May 18, 2009 | 2002 Lexus RX 300

1 Answer

Transmission stuck in neutral (automatic) won't engage drive or reverse


first i would check the transmission oil, do this by starting the engine and leave it running, select all the gears (park, Reverse, neutral etc) then put it back to neutral, leave engine running then locate the transmission dipstick in the engine bay, remove and wipe the dipstick, replace then pull out again, if the oil is showing between the cold and hot marks then level is ok. I shoing lower or none, top up the oil level with automatic tansmission oil, keep rechecking the oil level as adding oil as to ensure it is not over full. will need to select all gears again before checking oil level again.
If the oil level is correct than quite likley a Transmission failure will require mechanic.

May 02, 2009 | 1988 Nissan Pulsar

1 Answer

Reverse acts like neutral


whats the cars milage???trans filter service, possible bad trans??

Jan 14, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

1991 honda accord auto with 66000 miles


I had a similar problem mine would not shift correctly and the light stayed all the time. I replaced the TCM (transmission control module), its located under the passenger side floor board its not very hard to replace I believe its only four bolts holding it in place. Just pull back the carpet and its visible. But you have to know if its a japanese or an american built honda when you buy your new one.

Jan 12, 2009 | 1992 Honda Accord

Not finding what you are looking for?
2002 Chevrolet Express Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...