Question about 2003 Hyundai Santa Fe
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
In 2002 they discontinued the external trans filter. So your vehicle could have the external filter. If you look next to the trans dipstick tube, on top of the trans case you will see the filter or you will see just a spot where the filter use to go before they eliminated it. Yes, the filter does llok like a regular engine oil filter. If the trans does not have the external filter ontop then there is no service to the filter to be done, the only recommendation is to bring vehicle into a shop to have the fluid flushed. By the way, make SURE you use the correct Hyundai SP-III trans fluid (not dexron/mercon). This fluid is specific to the Hyundai and can not be purchased from auto parts stores, only the dealership. Failure to use SP-III will cause premature wear to the internal bands and clutches.
Posted on Oct 19, 2008
Do you want to replace the Go to belt yourself? Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
Posted on Jun 06, 2009
Please follow the steps to change the fuel filter. You would need to remove the left rear seat (four 14mm bolts). I think you'll need to finish cutting through the tabs on the carpet to be able to lift up the carpet. Then remove the access cover. You can then remove the fuel pump from the top of the tank.
Thank you for contacting Fixya.com
Posted on Jul 26, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
You simply locate where it's installed. Loosen and remove fuel hose clamps first. Plug any fuel hose ends with bolts of appropriate sizes. Remove the bolts and nuts holding the filter to the engine.
Replace filter with new one, and bolt to the frame. Connect back the hoses. Hint: its good practice to disconnect the negative post of the battery before starting this job.
Posted on Oct 21, 2009
Tips for a great answer:
Oct 20, 2011 | 2007 Hyundai Santa Fe Limited
Jan 11, 2011 | 2004 Hyundai Santa Fe
Sep 20, 2010 | 2007 Hyundai Santa Fe Limited
Nov 13, 2009 | 2004 Hyundai Santa Fe
Jul 19, 2009 | 2003 Hyundai Santa Fe
Jul 09, 2009 | 2001 Hyundai Santa Fe
Jul 08, 2009 | 2002 Hyundai Santa Fe
Nov 23, 2016 | 2003 Hyundai Santa Fe
18 people viewed this question
Usually answered in minutes!