Question about 1995 Audi S6

Open Question

Manual transmission missing 2nd 3rd and 4th gears 1st 5th and reverse are fine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 24 Answers

SOURCE: Audi A4 Quattro (2004) bumping/knocking from manual transmission

HI,IT SOUNDS TO ME LIKE THE TORSION DIFFERENTIAL ON THE GEARBOX IS CAUSING THIS,PLEASE TRY THIS,DRIVE THE VEHICLE TO A OPEN AREA,YOU MUST PUT IT IN 2ND GEAR AND DRIVE IN A CIRCLE ONE WAY ABOUT 10-15 TIMES,AND THE SAME THING CHANGING DIRECTION,THE REASON I SAY THIS IS TO LOOSEN UP THE TORSION GEARS,PLEASE LET ME KNOW,ANDY.

Posted on Mar 19, 2009

Ad
dj_relly999
  • 4070 Answers

SOURCE: transmission problem with a 1999 audi a4 quattr0 2.8l

you may not need a transmission replacement, just try replacing the sensor of the transmission, it may help

Posted on Jul 02, 2009

  • 1 Answer

SOURCE: 2008 a4 6 speed gearbox :- hard to engage 1st 2nd

I have had 3 gearboxes in my Audi A4 58 plate and it still jumps out of reverse. it always crunches going into second. Hop that helps.

Posted on Feb 14, 2010

AutoDocP
  • 56 Answers

SOURCE: 2nd gear drops hard

Dear Madam or Sir,

this is a well known problem with the Audi-transmissions, we do have a lot of failures with them over here in Germany. ;)

There are some software updates available, in many cases this fixed the problem.

Another possibility is a faulty transmission speed sensor, this is causing the hard shift behaviour.

First you should see the dealer to check the transmission control module´s trouble code memory and to check if there is a software update available for your car.


Posted on Jun 25, 2010

  • 92 Answers

SOURCE: 1996 Audi A4 1.8 auto gets stuck in 3rd gear

Change the transmission fluid ant if that doesn't work then the transmission needs rebuilt or replaced. If you get on craigslist someone might be selling a transmission for cheap or check the salvage yards.

Posted on Jun 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 chevrolet cavalier, manual transmission lost 2nd, 4th and reverse but still has 1st, 3rd and 5th gears.


Sounds like one of the levers inside the transmission is either broken or otherwise disengaged. Remove the shifter to see if you can see any obvious reason.

Aug 25, 2012 | 2003 Chevrolet Cavalier

1 Answer

No second gear. 2001 sl1 manual. goes into 1st, 3rd,4th,5th, and reverse. Any ideas?


possible stripped 2nd gear syncromesh. Used or rebuild transmission required

Dec 01, 2011 | 2001 Saturn SL

1 Answer

5th gear went out yesterday when u put it in 5th its 3rd gear. Then today reverse 1st and 2nd went out. Reverse 1st and 5th is 3rd and 2nd and 4th both is 4th gear


time to put a new tranny in that jet most of the time it costs to much to repair it then replace it i have done may tranny rebuilds and replacements to me i would just tell you to replace it at least you will get a better warrentee and stuff

Feb 27, 2011 | 1988 Volkswagen Jetta

2 Answers

Ford transmission wines in 1st 2nd 3rd revers, no


It is a 5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings.

Apr 16, 2010 | 1995 Ford Aerostar

1 Answer

My ford focus tdi 2003 cant select 1st,3rd or 5th gears.


Car is in limp in mode unless you have the tools to work on automatic transmission you will need to take it to a transmission shop. Of course you can check oil level but I suspect you have other issues.

Mar 26, 2010 | 2003 Ford Focus

1 Answer

92 chevy s10 4x4 4.3L manual transmission no 3rd gear


Hi:

Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse

If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.

Nov 30, 2009 | 1992 Chevrolet S-10

1 Answer

Only 3rd and 4th gears available - 1998 jetta


im not telling you what to do because it could be a bad transmission and an easy fix but I cant tell without looking at it , but if its a hard fix just go to a reliable junkyard and get another

Aug 11, 2009 | 1997 Volkswagen Jetta

1 Answer

What different gear box can fit honda integra xsi vtec 1600cc b16a? i want to change my gear box ,and i want to know what exactly other gear box can fit my car?thanks its a integra bot the product can show...


J1/S1 Found in: Integra XSI/RSI (DA6) Type: Cable 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400 Y1 Found in: CRX/Civic (optional LSD) Type: Cable 1st: 3.166 2nd: 2.052 3rd: 1.416 4th: 1.103 5th: 0.870 R: 3.000 FD: 4.266 YS1 Found in: Integra 92-93 XSI/RSI (DA6, DA9) Type: Cable 1st: 3.307 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.880 R: 3.000 FD: 4.400 S80 Found in: Integra Type R 98+ (LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.785 S80/Y80 Found in: JDM SiR-G (optional LSD) Type: Hydraulic 1st: 3.230 2nd: 1.900 3rd: 1.360 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.400 Y21/Y80/S80/S4C Found in: JDM 96-97 Integra R(LSD) JDM Civic R [EK9](LSD) JDM Civic SiR [EK4, EG6] JDM CR-X DEL SOL SIR (EG2)(optional LSD) USDM DEL SOL VTEC (EG2)(OPTIONAL LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400

Jun 08, 2009 | 1990 Honda CRX

1 Answer

I lost my third gear


It seems in the manual transmissions the first gear to go is 3rd gear..
signs of a failing trans

Dec 08, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
1995 Audi S6 Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...