Question about 2006 Hyundai Tiburon

Open Question

2006 hyundai obd readiness reset - 2006 Hyundai Tiburon

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i know if the motor is primed/ready for testing?


For OBD 2 there are thing's the cars computer check's for emissions , there called monitors . When these monitors run an set the vehicle will be ready to pass an emission test . OBD Readiness Monitors Explained OBD Auto Doctor Scantool Garage Read this if you would like to know more . Normal driving will set the monitors in time or you could try an speed up the process with a drive cycle

Oct 01, 2016 | 2006 Dodge Charger

1 Answer

What is this code P1507 mean? Comes up on a 2006 Hyundai Sonata.


All this means is that your car will not pass an OBD 2 emissions test.
P-powertrain
1-MFG: manufacturer specific
5- vehicle speed control and idle control system
07- Hyundai 07 fault code.

Dec 17, 2015 | 2006 Hyundai Sonata

3 Answers

PO-139 I had that sensor change 3 weeks ago and the check engine light came on again this morning.Thanks


Probably replaced a good sensor. This codes could be from a bad sensor, a vacuum leak, or an exhaust leak before the sensor.

Dec 01, 2015 | 2006 Hyundai Tucson

1 Answer

Hyundai atos 2005 driving so slowly


have you had the OBD codes read at a garage this may help to point you in the right direction,sounds like a sensor(s)

Apr 04, 2014 | 2006 Hyundai Atos 1.1

1 Answer

2006 hyundai elantra obd won't communicate with smog check station


Just to clear things up, having the monitors ready has nothing do to with OBD Communications. Ready or not, it will communicate. The original issue here was a station with a bad scanner. she did the right thing trying somewhere else and following up to get her $ back.

May 23, 2012 | 2006 Hyundai Elantra

1 Answer

Malfunction indicator light on hyundai mica


If the MIL light is on then a problem has been detected by the computer. You will need to get an OBD II C.A.N. code reader. Once it is connected, it will tell you the trouble code and from there you can figure out how to repair the issue and reset the light.

Dec 29, 2010 | 2006 Hyundai Azera

1 Answer

How do i reset the obd showing not ready. I have put over 300 miles and the o2 sensor and evap is showing not ready


Hello Lytten.

It may take a while yet to run the tests.
If all systems are functioning normally it will eventually reset.
Some of the tests need very specific parameters in order to test themselves.
Air temperatures, fuel levels, highway runs, stop and go traffic for some examples all come into play.
Drive it for a while more, you will find it will be OK.

Thank you for using FixYa.

KL

Nov 10, 2010 | 2004 Hyundai Elantra

1 Answer

Failed inspection cause two diagnostics are not ready --


a lot of systems on OBD2 need to have a week of stop and go plus highway driveing to set the monitors.If they tried to change those items(The belts) to correct the OBD issue then I feel that you did get cheated.

Aug 15, 2008 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?

Open Questions:

0 Answers

Shifting problems My car is a 2006 Hyundai Tiburon, Automatic, 2.0L 4 Cylinder I've had the car two years I don't know what's related and what isn't so here is the story. Bought car, (cruise control did not work) but everything else seemed fine, engine light came on code read Vehicle Speed Sensor so I bought an input and an out transmission speed sensor and had them installed, Motor blew 2 heads had motor replaced with an almost new motor. Cruise control now works, three days later car would not come out of park shifter moved but car stayed in park felt like shifting cable let loose, I called a backyard mechanic friend and he moved the shifter hard and it went into drive said probably buddy who changed motor forgot to unhook cable and stretched it (made sense to me) it did this everytime car was put into park had to yank on the shifter to get it to shift so I started parking her in neutral and it never messed up, after 3 weeks my new shift cable came in so I went to show my mechanic what car was doing it wouldn't do it worked fine, told him I'd call him next time it messed up this is a year and a half later hasn't messed up like that again! I had already bought the cable so I decided to have it installed anyways even though problem seemed fixed went to a shop they told me nothing is wrong with my cable..... Approx 6 months ago put car into drive and started driving the car reved out (I call it) motor got really loud and RPM gage went to 4K and car jerked really bad and made a really loud snap noise so I pulled over and roughley shift car into park and back into drive and drove this fixed the issue for that drive anyways.... my car one day over heated to red line in a 5 minute drive in the winter my mechanic said must be an air lock so he drained my fluid and replaced ect, next day car wouldn't start, blew starter, replaced that, next day driving car and in a 5 minute drive it overheated to red line took car to shop he said gage is reading wrong car is barely even warm so I decided to take the car home and worry about this issue pay day well the next day car wouldn't start, blew alternator, at this time my mechanic looked over car more closley turns out I had a bad ground so he put on new alternator and new ground, this was a month ago and no more issues with overheating or not starting. However I still have this issue (copy and paste) "put car into drive and started driving the car reved out (I call it) motor got really loud and RPM gage went to 4K and car jerked really bad and made a really loud snap noise so I pulled over and roughley shift car into park and back into drive and drove this fixed the issue for that drive anyways...." After having ground put on and shifting issue still there I took my car directly to Hyundai they ran all their computer tests and transmission tests and took car for a test drive car worked fine and only code that came up was Vehicle Speed Sensor. So here is where I stand first question how many speed sensors does my car have is a transmission input/output speed sensor different then a vehicle speed sensor? I looked on parts sites and only speed sensors I find are ABS speed sensor and Vehicle Speed Transmisson Sensor, so maybe sensors I bought are no good but they were bought new or maybe the connector for the sensors are bad? I don't know any suggestions would be greatly appreciated.

Jan 12, 2016 | 2006 Hyundai Tiburon

See all 2006 Hyundai Tiburon Questions

2006 Hyundai Tiburon Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...