Question about 2007 Mazda B2300

1 Answer

How do you get the spark plugs out of a 94 mazda b2300

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,689 Answers

Here is an answer from an expert at just answer

By heater hose you mean near the water outlet/thermostat? That is it, I believe. I think it would be a good idea to clean the MAF, though it sounds like it will probably need replacing. It is fairly expensive, though, -and- there have been issues with "reman" units from the aftermarket not being correct in calibration. It can be cleaned, I have seen many issues with aftermarket oiled filters contaminating the MAF with a little film of oily dirt. Must use Brake cleaner, carb cleaner will damage it, and not a good idea to touch the small wires inside.
Do you have access to a scan tool? It would be a real good idea to actually look at the values for coolant temp, intake air temp- also, there could be an issue with the egr hanging open, hard to say without hearing it and scanning it myself. But you could try unplugging the EGR vacuum hose, see if it makes a difference. It is fragile, though, and you must be careful not to snap the plastic line.
Let me know-
Thanks,
Jim



Posted on Jun 23, 2009

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 30 Answers

SOURCE: hi I have a 94 mazda B2300 4 cylinder, Why very poor gas mileage

check the fuel filter or a possible leak in the fuel line or vacuum lines.your exhaust could be clogged causing too much back pressure

Posted on Mar 15, 2009

  • 2002 Answers

SOURCE: How to install Pwr Steering in 94 Mazda B2300 (same as Ford Rngr)

You'll also need to change the steering box. The stock axle should be okay to use. Be careful hooking up the new box and make sure it is centered, the same number of turns to the stop when you turn it left or right. Also make sure the pitman arm is the same length, on the Ranger, so the front end isn't out of whack, and check the clearance at the radiator and fan. Hope this helps.

Posted on Aug 10, 2009

jayhawke
  • 338 Answers

SOURCE: Check engine light on a 96 Mazda B2300, 4 cyl.,

1-try some Lucas Engine Clean . 2-Change wires and plug

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing heater core 94 mazda b2300 2.3


This is a re-badged Ford ranger so watdh the video of rthe ranger heater core change out. How To Replace Heater Core On Ford Ranger

Dec 05, 2016 | Mazda B2300 Cars & Trucks

1 Answer

My 1996 mazda B2300 4 cylinder is not firing on 2 and 3. What do I need to do?


Check the firing order of the plug wires . have a compression test done as you may have a blown head gasket between the two cylinders. Check distributor cap for cracks and internal condition that will allow shorting of the spark

Oct 13, 2013 | Mazda B-Series Truck Cars & Trucks

1 Answer

How do you get the fuel return an fuel line off the motor of a 94 Mazda b2300


your motor is the same as the ranger you need the fuel line disconnect tool sold at all auto stores they are around twenty bucks they slip in the connecter and release the spring allowing you to remove line

Apr 23, 2012 | 2005 Mazda B2300 Regular

1 Answer

How to install Pwr Steering in 94 Mazda B2300 (same as Ford Rngr)


You'll also need to change the steering box. The stock axle should be okay to use. Be careful hooking up the new box and make sure it is centered, the same number of turns to the stop when you turn it left or right. Also make sure the pitman arm is the same length, on the Ranger, so the front end isn't out of whack, and check the clearance at the radiator and fan. Hope this helps.

Aug 09, 2009 | 1990 Ford Ranger SuperCab

1 Answer

1996 timing belt changed, lined up all the marks, still won't start, do i place on tdc, remove belt from harmonic balancer,turn crankshaft eone rotation, then put timing belt back on , then try to start?...


Hi my name is juan and lets try to solve this it is possible that when you rotated the camshaft the distributor last his position and this is why it won't start it may not be the problem but this happens a lot so open your distributor and aline up your marks on camshaft and the crankshaft then make sure the distributor is pointing near the #1 spark plug if is opposite give it a 1 more turn to the crankshaft line up your marks again and se what happens #1 spark plug is the closets to the front part of the engine on 4cil

Mar 25, 2009 | 2007 Mazda B2300

1 Answer

Hi I have a 94 mazda B2300 4 cylinder, Why very poor gas mileage


check the fuel filter or a possible leak in the fuel line or vacuum lines.your exhaust could be clogged causing too much back pressure

Mar 09, 2009 | 1994 Mazda 2WD B Series Pickup

Not finding what you are looking for?
Cars & Trucks Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...