Question about Cars & Trucks

Open Question

Fowler vibra-tac instructions? - Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick lucerne starting disable throttle causes car not to crank


Drive by wire , electronic throttle control . What is it you would like to know Mr. Woods ? Can throttle cause car not to crank ? What year Buick ?
STARTING DISABLED SERVICE THROTTLE
Throttle Actuator Control (TAC) System Description for the 4.6L engine or Throttle Actuator Control (TAC) System Description for the 3.8L engine.

Purpose
The throttle actuator control (TAC) system delivers improved throttle response and greater reliability and eliminates the need for mechanical cable. The TAC system performs the following functions:
• Accelerator pedal position (APP) sensing
• Throttle positioning to meet driver and engine demands
• Throttle position sensing
• Internal diagnostics
• Cruise control functions
• Manage TAC electrical power consumption
The TAC system includes the following components:
• The APP sensors
• The throttle body assembly
• The powertrain control module (PCM)

Drive by Wire training

Jan 01, 2017 | Buick Cars & Trucks

1 Answer

Wiring diagram for code u0107 2004 avalanche


Do you even know what DTC U0107 involves ?
DTC U0107
Lost Communications With Throttle Actuator Control (TAC) Module

The throttle actuator control (TAC) module and the powertrain control module (PCM) communicate via a dedicated serial data circuit. This serial data circuit is separate from any other serial data circuit on the vehicle. Accurate transmitting and receiving of serial data requires not only good circuit integrity, but also adequate system voltage. This diagnostic test monitors the accuracy of the serial data transmitted between the TAC module and the PCM. If the PCM detects a loss of data or invalid data, this DTC sets.

Diagnostic Aids
Important: Reprogramming the PCM may cause a communication error between the PCM and the TAC. If the PCM detects a communication error, DTC U0107 sets. Clear any DTCs from the memory that may have been set by Reprogramming.
• DTC U0107 sets if the battery voltage is low. If the customer's concern is slow cranking or no crank because battery voltage is low, ignore DTC U0107. Clear any DTCs from memory that may have set from the low battery voltage condition.
• DTC U0107 sets when there is a short to B+ on the TAC module ground circuit. Inspect the fuses for the circuits that are in the TAC module harness--i.e. cruise, brake. An inspection of the fuses may lead you to the circuit that is shorted to the TAC module ground circuit.
Replace the TAC module. Refer to Electronic Throttle Actuator Control Module Replacement .
Did you complete the replacement?

Nov 20, 2016 | Cars & Trucks

1 Answer

I took spark plugs out of 2001 Ford Ranger 3.0L to place plug fowlers in. Spark plug will fit in fowlers, however; fowlers will not fit in engine. Placed plugs back in engine and now will not start.


Sounds like that car is the proverbial POS. Did you check for spark? - need a strong one with a car burning that much oil and the plugs getting fouled like that. Need to replace those rings!

Nov 30, 2015 | Ford Cars & Trucks

1 Answer

Engine won't start and shows trouble code P1516 and reduced engine power light is on


Here is the definition of the code.

Possible causes - Faulty Throttle Actuator Control (TAC) module
- Throttle Actuator Control (TAC) module harness is open or shorted
- Throttle Actuator Control (TAC) module circuit poor electrical connection (loose or broken wires)

P1516 CHEVROLET Description The Throttle Actuator Control (TAC) module contains data which is essential for proper TAC operation. The TAC module continuously test the integrity of this data. When the TAC module is unable to write or read data to and from Random Access Memory (RAM), or the TAC module is unable to correctly read data from the flash memory or and internal TAC module processor fault is detected and the Detected Trouble Code (DTC) is set.
Read more: http://engine-codes.com/p1516_chevrolet.html#ixzz286Gl3cSo

Sep 28, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

I have a 2004 chevy trailblazer that gave me code p1518


P1518 CHEVROLET Description The Throttle Actuator Control (TAC) module contains data which is essential for proper TAC operation. The TAC module continuously test the integrity of this data. When the TAC module is unable to write or read data to and from random access memory (RAM), or the TAC module is unable to correctly read data from the flash memory or and internal TAC module processor fault is detected and the Detected Trouble Code (DTC) is set.
Read more: http://engine-codes.com/p1518_chevrolet.html#ixzz21VOQMCZz

Jul 23, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

No throttle response


What you replaced is the APP(accelerator pedal position) It is part of the electronic throttle control,what was truly needed is know as the TAC MOTOR. This recieves signal from the APP.The TAC is what accelerate the car.The only thing you can do other than replace the TAC,is do a TAC relearn .Turn thhe key off. wait ten seconds,Turn key on with the engine off.leave 1 minute. Turn key off start the vehicle you will hear the TAC motor setting itself.

Mar 08, 2012 | Saturn Cars & Trucks

1 Answer

Tengo problemas con mi truck f 150 vibra mucho


mi ford f150.. cuando paro en la luz roja vibra y se apaga... que puede ser?

Jan 05, 2012 | Ford F150 Cars & Trucks

1 Answer

2009 Ford Fusion codes 2107,2110 car slows to 30mph and will no longer accelerate


Well, those codes definately are related to why your vehicle will no longer accelerate!

P2107 is "Throttle Actuator Control (TAC) Module Processor"
This code means that the TAC portion of the Powertrain Control Module (PCM) has failed the self-test.

Posiible causes:
> TAC motor circuit harness shorted to ground
> TAC motor circuit harness shorted to voltage
> Damage Electronic Throttle Body (ETB)
> Damaged PCM

P2110 is "Throttle Actuator Control (TAC) Forced Limited RPM"

This code is informational only. It sets in conjunction with other throttle actuator control codes (like P2107 above). It is just letting you know that the PCM is limiting RPM due to a TAC malfunction, (So it doesn't do a "TOYOTA" on you and run away!"

Jul 06, 2011 | Ford Fusion Cars & Trucks

2 Answers

Diagnostic code P1516


Hi
Click on the following link for repair instructions http://www.aatecusa.com/obdIIpro/membersonly/technical-tips/obdii/GM_TSB_03_06_04_041A.pdf
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.
Description of Trouble Code: P1516

TAC Module Throttle Actuator Position Performance

Possible Causes:

TAC motor CKT 1 or CKT 2 is open, shorted to ground or B+ Throttle actuator motor CKT 1 is shorted to CKT 2 Throttle actuator motor control module has failed TSB 03-04-06-034 contains a repair procedure for this code

Jan 03, 2011 | Chevrolet Equinox Cars & Trucks

1 Answer

2003 mustang timing belt


cuando el motor se te amarra o suena mucho es algo parecido a tac tac tac tac
asi se escucha mas o menos

Sep 02, 2008 | 2003 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...