Question about 2002 Toyota Sequoia

Open Question

Horn fuse - airbag light just went on and horn does not work - turned off the truck - light went off but horn is not working

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Air Bag Sensor light on & horn not working

Without knowing exactly what the air bag code is, coupled with the known fact that the horn is inoperative, my opinion for a viable solution is to replace the spiral cable or, as commonly called, the "clockspring". This device is the main wiring connection between the steering wheel and the wiring harness. If the circuit(s) open,due to a failure of the spiral cable, the air bag light will be on, the horn will not work,and , if you have a steering wheel Cruise control, it too may be inoperative. Best solution: replace the clockspring. Best advice: Get the airbag DTC's checked, and if you have an open in the driver side air bag circuit, the clockspring is def the culprit. Given that you had chassis work, your DTC just may be the front crash sensor, and the horn may just be unplugged, or bad, This is the best I can do for you, given the info that you have provided,
Hope this helps, and thanks for choosing FixYa.

Posted on Nov 06, 2008

Ad
Jay_from_Ma
  • 99 Answers

SOURCE: the horn on my truck stopped working

Check your fuses first for a blown fuse. Also try to recall last time you used the horn, and if it sounded muffled, quieter than normal or just not right, and if it was acting up it's more than likely the horn, wich is located under the bumper by the fender usualy. Also remove your horn button on the wheel, and make sure the wire is conected, and intact.
Hope this helps, Good luck!

Posted on Dec 17, 2008

  • 13 Answers

SOURCE: 98 Toyota 4Runner Horn malfunction

have you cheked if the horn itself is well grounded, it could be that the screw hoding is lose.

Posted on Jun 18, 2009

  • 1 Answer

SOURCE: horn died,airbag light came on steering seems stiffer

2003 corolla, horn stop working and now air bag light is on. Was told a senor was out on the steering.

Posted on Jul 08, 2009

dmsr63
  • 2050 Answers

SOURCE: Airbag light wont go off and the horn does not work

You may have a clock spring issue. It allows you to turn the wheel and keep power to the air bag. See if the light flashes a code at you. (Such as three blinks, pause, then two would be a code 32)

Posted on Nov 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horn not working, airbag light on, crunching sound in steering


the horn problem could be a fuse or faulty horn most likely the fuse. airbag light could be a faulty relay or fuse. crunching sound in steering could be a sign of faulty rack and pinion good luck

Apr 15, 2014 | 2004 Toyota ECHO

1 Answer

Horn not working


use a test light see if horn getting power,if test light flash when you press horn pad,more likely horn could be bad or hot wire horn see if it works,if no horn need replacing,if test light dont blink when you press horn pad you have blowed fuse or bad horn relay,if both fuse and relay of the horn pad bad have replace whole horn pad with airbag in the steering wheel.

Aug 30, 2012 | 2000 Chrysler Cirrus

2 Answers

Horn just quit working.


Do you get a click when you press the button? The relay should be audibly clicking if it's working.
If it is clicking then I'd check the horn itself, might be bad or have loose connection. If no clicking sound at all then I'd suspect bad relay or fuse (if it has a dedicated one), also possibly bad switch.

Sep 01, 2011 | 2001 Chevrolet Silverado

3 Answers

I have a dodge caravan 2000, and the horn doesn't work. I changed the relay fuse and fuses. It still doesn't work. Please help.


REMOVE HOTWIRE HORN OR PRESS REMOTE BUTTON LOCK CAR DOORS IF YOU HEAR CAR HORN BLOWS WHEN ACTIVATE CAR ALARM. HORN WORKING.MORE LIKELY THE AIRBAG AND HORN PAD NEED REPLACING.IF YOU GOING TO FIX. DISABLE AIRBAG IN THE STEERING WHEEL BEFORE REPLACING THE AIRBAG AND HORN PAD. TURN OFF RADIO.THEN DISCONNECT NEGATIVE BATTERY CABLE FOR 20 MINUTES BEFORE REMOVING AIRBAG IN STEERING WHEEL.THAT HORN PAD WITH AIRBAG IS NOT GOING TO BE CHEAP.

Jun 12, 2011 | Dodge Caravan Cars & Trucks

1 Answer

I have a 1999 pontiac grand am. the airbag light and horn does not work.


Try looking for the fuse of the airbag and horn to start.

The airbag module may be bad if it doesn't light or the bulb is burnt out on the instrument panel.

Oct 07, 2010 | Pontiac Grand Am Cars & Trucks

1 Answer

2004 ford windstar, the airbag light is on and the horn will not work


As far as the horn, check for a blown fuse, if fuse is ok, locate the horn underneath the hood, check for power at the horn while someone else is pushing the horn. If you have battery voltage at the horn while someone else is pushing the horn, chances are you have a bad horn. Airbag light, check front impact sensors for damage or corrosion, unhook negative battery cable before touching the frontal impact sensors, Good luck, Gary

Jul 27, 2010 | Ford Windstar Cars & Trucks

1 Answer

Radio has no power. Horn doesn't work. I also


check fuses first step. if o.k. check power at radio-12v. horn &air bag may be related .airbag system needs checked by a pro. test fuses / test light or ohmmeter.

Jun 05, 2010 | 2001 Volkswagen Beetle

1 Answer

The horn on my 04 mitsubishi endeavor went out and also noticed at the same time the alarm on my lock n unlock remote doesn't work. How do i fix the problem?


Standing out side the car, reach in and push the horn pad. Do you hear a click under the hood?

If not, check your fuse. If the fuse is good, check the relay.

If you do hear the click, your horns have likely failed. You can check for 12 volts with a multimeter or test light on the horn wire when the pad is depressed to verify.
If the relay and fuse check out OK and you still do not have power at the horn wires, your pad may have failed or the wire has come loose from it. This is an airbag component and should not be disassembled without familiarity with airbag systems..

If you do have 12 volts at the wire with the pad depressed, replace your horns.

One horn is located below the drivers headlight.
The other horn is near the firewall on the passenger side.


Sep 15, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Airbag light on, horn doesn't work


There is a fuse for the airbag. If there is an owners manual for the car, look in that, it will show where the fuse is. On some cars it is in the fuse box under the hood.

Jun 19, 2009 | 1991 Saturn SL1

1 Answer

Horn,airbag light,cruise control


Sounds like a bad clockspring

Feb 27, 2009 | 2003 Chrysler 300M

Not finding what you are looking for?
2002 Toyota Sequoia Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...