Question about Ford Focus

Open Question

1.6 ford focus ti-vct duratec engine noise at engine start up only last a few seconds any idea what the fault is

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 208 Answers

SOURCE: Engine Mounts

Yes, a bad engine mount can cause that much noise.

Posted on Sep 18, 2008

Ad
  • 30 Answers

SOURCE: Ford Focus Engine System Fault warning light

yes there is a know problem with the fuel system. fuel pump breaks down, empty your fuel filter into a bowl and check for metalic, if you have this in the filter your pump is F..... along with all the other common rail stuff. expensive job... error codes though, i find that hard to believe, fuel pressure faults will occur, i think you garage does not know what to do. or does not want to tell you the cost of the job and he will be in doubt himself of wether he is right..... was you engine coil light flashing at any point.!!!

Posted on Mar 30, 2009

  • 202 Answers

SOURCE: reprogram new ignition key ford focus

the system on this car may not allow for more than 2 keys

Posted on Nov 17, 2009

alicantecoli
  • 22246 Answers

SOURCE: i have a 2007 ford focus 1.8 diesel and the engine

sorry but the local ford garage are right its got to do it when the mechanic has it ,i would suspect the alternator ,but who knows with these weird faults like this .Best advice i can give here is leave well alone till till it packs up completly

Posted on Dec 22, 2009

  • 1 Answer

SOURCE: Ford Focus 2.0tdci 2005 - Engine suddenly lacking power / noises

One of the air intake pipes had come loose. Fastened the jubilee clip back up and it was like having a new car!

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 ford fiesta duratec engine losing power while driving.


too many possibles
run the fault codes and get closer to a problem area

Oct 11, 2016 | Ford Fiesta Cars & Trucks

1 Answer

Ford focus 2.0 duratec losing engine power, no cel fuel psi is at 30 when idling and 40 when revving replaced maf and, cleaned egrchecked for vacuum leaks changed manifold gaskets! Any idea


Pull out the spark plugs their is probably oil or water in the well surrounding plugs. Cheap eaasy fix for water just dry it out. oil? Replace valve cover gasket .

Oct 06, 2016 | 2005 Ford Focus

1 Answer

Diesel particle filter /system cleaned and put in 2 lts of fluid but light in dash will not go out


sure , read the FSM.
go to Ford, , parts counter and buy the Factory service manual.
on my car 08 , its on CD and is 7000 pages. long.
make sure its covers the Diesel option.
some (many) makers of cars, alternate engine options have
SUPPLEMENTS. ask em'
what country are you in, or where was car sold to.
see the diagnostic pages for your DTC errors and all tests to do.

second gen, Focus engine; line up, WHICH ONE>?

1.4 L I4 Zetec-SE
1.6 L I4 Zetec-SE
1.6 L I4 Zetec-SE Ti-VCT
1.6 L I4 Diesel TDCI
1.6 L I4 Diesel TDCI DPF
1.8 L I4 Duratec HE
1.8 L I4 Diesel TDCI
1.8 L I4 Duratec HE FFV (Flexifuel vehicle)
2.0 L I4 Duratec HE
2.0 L I4 Diesel TDCI
2.5 L I5 Turbocharged T

diagnosing any engine.
step 1 is engine
and step 2 is blown fuses.
and step 3 is read the TSBs on your car. (tech .serv. bul)

Jul 10, 2014 | 2006 Ford Focus

1 Answer

2003 2.3 L duratec dohc ford focus thermostat housing


You can purchase an automotive manual at Advance Auto Parts to show you this. (HAYNES MANUAL # 36034) Hope this helps. Good luck. Manual approx. $ 25.

Nov 12, 2013 | 2003 Ford Focus

1 Answer

I have a 2001 ford mondeo duratec 2.0 when starting it sometimes it starts first time other times it turns over quite a bit before starting, any ideas please.


fuel pressure should stay high after car is turned off for 60 sec at least then stay sort of high for some time after that

Feb 27, 2010 | 2001 Ford Focus

1 Answer

Ford ka engine ligt keeps coming on car looses power engine noise changes then completley stops cant find diagnostic problem happens all the time we drive the car no set time or mileage


is it the duratec or endera e ! needs to be checked by ford etis diagnostics from dealer sometimes if problem doesnt throw any codes common problem would be coil pack starting to pack up . even contaminated fuel would cause this damaging the catslyist check for any leaking vacuum pipes split ect

Feb 20, 2010 | 2003 Ford Focus

2 Answers

Engine Mounts


Yes, a bad engine mount can cause that much noise.

Sep 15, 2008 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...