Question about 2006 Infiniti FX35

Open Question

Antilock brake engagement no codes - 2006 Infiniti FX35

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

C0131 CHEVROLET malibu 2008 code C0131 ABS/TCS System Pressure Circuit Malfunction. what could be the problem

DTC C0131
Antilock Brake System (ABS) Pressure Circuit.
  • The braking system is not performing an antilock or traction control event.
  • The 2 master cylinder pressure sensors do not correlate.

May 28, 2016 | Cars & Trucks

1 Answer

Trac control light on & anti lock lite came on same time stays on

That means there is a problem with the ABS , has DTC'S - diagnostic trouble codes in the EBCM - electronic brake control module . You need to have diagnostics run on it !
Traction Control/ Stabilitrak Off: Refer to ABS Description and Operation in Antilock Brake Systems
This vehicle is equipped with the BOSCH 5.3 antilock braking system.
The vehicle is equipped with the following braking systems:
Antilock Brake System (ABS)

Dynamic Rear Proportioning (DRP)

Traction Control System (ETS) (w/NW7)

Traction Control System (TCS) (w/NW9)

Vehicle stability enhancement system (VSES)

Oct 04, 2015 | 2004 Pontiac Grand Prix GTP

2 Answers

04 trailblazer.antilocks kick in when allmost stopped.why?

Could be bad wheel speed sensor, but if so this usually sets a code. Bad hub assembly may have wheel bearing loose enough to trigger anti lock. Bad news is you must replace entire hub assembly. Don't buy cheap parts store hubs as they do not hold up long. Order quality OEM hubs from Summit or Jegs.

Dec 28, 2014 | Cars & Trucks

2 Answers

Brake and abs light is on what hapen

The antilock brake system has a problem and needs servicing quickly before you have an accident.

Oct 01, 2014 | 2006 Chrysler Town & Country

3 Answers

Would bad rotors cause the antilocks to engage all the time

Usually this is a bad wheel bearing. Some times they make noise, sometimes not. You will have to put a scanner on it and find out which wheel sensor is acting up.

Sep 07, 2014 | 2002 Ford Escape

1 Answer

What do these icons mean 2996 gmc envoy

Do you mean 2006 GMC Envoy?
Top left- car with squiggly tire tracks and a wrench- that means something is wrong with your Stabilitrak (traction control) system. Top right- triangle around the car with squiggly tire tracks- this light comes on when the light on the top left comes on. It also means something is wrong with the Stabilitrak system. Bottom left- Antilock Brake System warning light- This means there is a fault in the antilock brake system. Considering that the stabilitrak control is part of the antilock brake system, it looks like there may be a common problem affecting both systems. You need to use a scan tool to access the chassis control system and read the diagnostic codes. There are definitely Diagnostic Trouble Codes stored when these lights are on. The code does not tell you what part to replace, but rather gives you a direction to go in diagnosing the cause of the problem.

Sep 21, 2013 | Cars & Trucks

1 Answer

The breake light and abs lights comes on and off, was told it was the computer chip, how much would it be to get it repair?

The first thing you need to do is get the codes from the antilock brake control module.There is no chip in the module.You need to see what code or codes are in the antilock brake system.This will tell you what could be causing the lights to come on.When the abs light comes on the brake light will automatically come on.Your regular brakes will still work normal but you will not have antilcok braking.Let me know what codes you get and I`ll be glad to help you finding the problem.Hope this helps.Good luck.

Feb 09, 2011 | 2000 Pontiac Sunfire

2 Answers

At times when I apply the brakes, right at the time when the vehicle should be coming to a complete stop, the brakes seem to let up and allow the vehicle to slide up a few feet more.

i would suspect your antilock brakes are activating. you probably have one of your wheel speed sensors that drop to 0 mph fooling the computer that one of the wheels have locked up and therefore goes into antilock mode. no code would set as this is a normal function of antilock brakes, you would need to get a scanner on the car and monitor wheel speed input. as you come to a stop monitor the wheel speeds closely and look to see which one is droppind to 0 prematurly.

Jan 11, 2010 | 1999 Ford Expedition

1 Answer

Why do my anti lock breaks engage on my 1998 tahoe everytime?

either your antilock brake sensor is not working properly or your switch behind your foot brake is not working properly.

Jul 07, 2009 | 1998 Chevrolet Tahoe

1 Answer

Antilock brake light

take 2 walmart theres a code that has 2 be put in

Mar 21, 2009 | 1994 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides