Question about 1995 Oldsmobile Cutlass Supreme

1 Answer

New motor keeps stalling on my 1995 olds cutlass supreme

I really need help on this one.I'm a mechanic that walked into this problem.This 1995 olds,has a new motor in it.I found out that It is out of a chevy monte carlo(1995 I think) 3.1 LT. Vin is M code.The car starts up good at first.And after about a minute it wants to stall.I have to pump the gas to keep it going.Once it warms up,It then seems to be ok.I have check just about everything on this dam thing.And still can't understand why it is doing this.I'm just about to blow up this customers Car (just kidding).Please Can you help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 253 Answers

Look at the wires going to the crank sensor between the trans and engine. I have seen them get burned just below the EGR on the exaust crossover pipe. I had one eat my lunch before I found it. Good Luck

Posted on Jun 23, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 422 Answers

SOURCE: tranny from a 94 olds cutlass supreme fit a 95 monte carlo?

yes

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass


There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

Dec 08, 2015 | Oldsmobile Cars & Trucks

1 Answer

1995 old cutlass rocker arms wont tighten?


need to know what size motor you have but the 3.1, 3.4, and 3.8 liter motors are know for the rocker arm studs striping out inside of the head so while you think your tightening it your really only turning the nut and the stud. try putting a wrench(13mm) on it and turn to see if stud is turning. if so it will need to be drilled out and a helie coil put in it

May 21, 2014 | 1992 Oldsmobile Cutlass Supreme

1 Answer

How do i replace my blower motor on a 95 olds cutlass supreme


Click here to see how to remove blower motor.Click here to see relay.Click here to see resister,it next to blower motor.

Dec 15, 2012 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Just bought a 1995 olds cutlass supreme and tranny shifts great but when put into reverse its like hangs up then I gotta go neutral and drive a few times to free it up fluid is full no noises or any other...


It may likely be a bad motor mount, but you should take it to a ****** shop to make sure. You can usually get a free estimate and then go from there.
You should initially mention to the mechanic that you dont have the $$ for a full ****** rebuild, that way he may not be as upset if you get the diagnosis & then opt to not get the work done.

Feb 08, 2012 | 1995 Oldsmobile Cutlass Supreme

1 Answer

I need a walk through on replacing a starter for my 95 olds cut supreme....i got the wires off and the one bolt on bottom but its still not loosening


there are 2 bolts on bottom holding starter in place. sme have a bracket bolted to front also (usually discarded at first replacement).

Sep 23, 2011 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Timing marks for 3.4 v6 1995 olds cutlass supreme


It doesn't have any marks. Make your own before you remove the belt. If the belt was broke or you already removed the belt then you will have to remove the valve covers and install specialty tools into the ends of the camshafts to line everything up correctly.

May 17, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

1994 Olds cutlass supreme..Electric Window not working


That should be it for fuse compartments..

If its not the fuse(s) or relay it might bethe switch,, or the motor..

Try to determine if there is power getting to the switch,, if so see if there is power to the motor..

You can find replacement parts pretty cheep on-line..

Hope this helps !!
Please rate me good ;o)

Jul 10, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

1995 oldsmobile cutlass broken reclining seat motor


I would go to the junk yard and find a new motor. You can unbolt the seat and take it out. you could even try to hook the motor up to a car battery while out of the car.

Feb 22, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Fuel pump for 1995 olds cutlass supreme


No you will have to drop tank to access fuel pump.

Feb 06, 2009 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?

Open Questions:

See all 1995 Oldsmobile Cutlass Supreme Questions

1995 Oldsmobile Cutlass Supreme Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...