Question about 2007 Mini Cooper Convertible

Open Question

Why have my parking sensors stopped working - 2007 Mini Cooper Convertible

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parking sensor not working


It is very easy to test the sensors ,if you have access a stethoscope ( you buy cheap ones at a parts store or walmart) To test park on level ground... apply the parking brake turn the key on but do not start the car not put the car in reverse take the stethoscope and put on top of the out side sensors one by one ... you should hear a light tcking noise from the sensor when you get to the one not making a ticking sound you have found which one is not working ... ck the plug and wiring if its ok replace the sensor ( dealer only part ) plug the new sensor in and the system will reset automatically

Aug 05, 2012 | 2005 Nissan Almera 1.5

1 Answer

Rear wiper wont stop working in both auto,intermitant and off. was wondering whether it would be the relay?


Sounds as if the parked sensor is not working and the motor cannot "find" the correct
park position so it keeps running and looking for park.

Jan 28, 2011 | 2005 Audi A3

1 Answer

Backup sensor stopped working in my 04 escalade ext dinged someone in parking lot because of it


For the solution of Backup sensor stopped working please go through the link. I think it is helpful to you. .................... <a href="http://www.backup-sensor.com"rel="dofollow">Parking Sensors</a>

Nov 23, 2010 | 2004 Cadillac Escalade Ext

1 Answer

The gear is getting stuck... i press on brakes and when car is in park it is hard to put on reverse.. the car runs great...


In all probability the brake sensor on the pedal is starting to work erratically. This sensor sends a signal to the shifter gate, and the gate will not open unless the brake pedal is depressed. I had it happen to me, and the only solution until i replaced the sensor was to hit the brake over and over until the stop light worked (You can check it while looking at the 3rd stop light in the rear view mirror). If the stop lights work, the shifter gate should allow the shifter to move out of park. This sensor/ switch is located about 3 inches above the brake pedal, and it is easily recognizable by the cable attached to it.

Aug 31, 2010 | 2002 Honda Accord

2 Answers

When in park hard to move shift stick out of park


Moving the shifter out of park is sometime diffucult if the vehicle is parked on an incline or decline?

Aug 15, 2010 | 1993 Honda Accord

1 Answer

Honda transmission stuck in park


In all probability the brake sensor on the pedal is starting to work erratically. This sensor sends a signal to the shifter gate, and the gate will not open unless the brake pedal is depressed. I had it happen to me, and the only solution until i replaced the sensor was to hit the brake over and over until the stop light worked. If the stop lights work, the shifter gate should allow the shifter to move out of park. This sensor/ switch is located about 3 inches above the brake pedal, and it is easily recognizable by the cable attached to it.

Jul 07, 2010 | 1998 Honda Accord

Not finding what you are looking for?
2007 Mini Cooper Convertible Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...