Question about 1993 Buick Skylark

3 Answers

Why don't my turn signals and flashers work, fuse good 1994 buick skylark custom 4 cyl?

Worked well, then began to flash slow, now no turn signals at all. Just now found out emg flashers out as well

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Well, may not be much of a help but I had the same issue with my '93 and a mechanic told me it was electrical. I had replaced the fuse and bulbs a couple times and it would work but eventually slowed down again, I actually had to manually use the turn signals by moving the handle up and down everytime. Sorry couldnt be more help

Posted on May 11, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

  • Flashers need to be checked under dash (2) or maybe a bad ground

Posted on May 11, 2014

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 34 Answers

Have you checked the flasher unit. aprox 20.00 at auto zone

Posted on May 11, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

hankfan18436
  • 62 Answers

SOURCE: I have a 95 buick

If you have bought the car from a person they may have done some work on the steering column, If they did odds are they cut the wires instead of taking the time of feeding them up through the column. If this is the case a new wiring harness for it is only about 30 bucks, but you have to pull the steering wheel, be very carefull if you have airbags. all the work in changing that out is unplug the old one and tape a wire to the end pull it out and tape the new one to the same wire and pull it back through. I hope that helps.

Posted on Nov 18, 2008

  • 333 Answers

SOURCE: Flashers Won't work

The turn signal flasher is in a clip attached to the base of the steering column support inside the car. That would put it just about in front of your knees in the drivers seat, up under the bottom edge of the knee panel. I hope this helps you.

Posted on Nov 23, 2008

emissionwiz
  • 75822 Answers

SOURCE: location of turn signal flasher for 1997 Buick skylark

the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?

Posted on Dec 02, 2008

cadman000
  • 607 Answers

SOURCE: 02 Buick Century turn signal problem

try 2 new bulbs

Posted on Apr 21, 2009

  • 1 Answer

SOURCE: 1992 Buick Regal turn signals not flashing (stay on)

I have the same prob. with mine (93 regal). If you have any play at all in the turn signal switch on the steering column the issue is likely inside the column. I spent $500 last summer and the prob came back twice after that. They fixed it both times at no additional cost but the issue started again a few weeks later and they wouldn't touch it or refund money. You can only get to it by pulling the steering wheel. I am gonna try it myself if I can find a puller at a resonable cost. Go to a good reputable mechanic (pref. someone you use regularly) if you can. Good luck, I hope it turns out better than mine..

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals dont work on 1989 buick skylark,hazard lights work good.


the turn signal flasher is bad. it looks like the hazard flasher and only works the signals.

Mar 10, 2015 | 1989 Buick Skylark

1 Answer

1968 buick skylark's turn signals stoped working. The flasher still works what could be the problem?


The main components are the flasher and the switch.
You would need to check for power in and out of the turn signal switch.

Mar 07, 2013 | Buick Skylark Cars & Trucks

1 Answer

My turn signals don't work and I've checked the bulbs, fuses & flasher.


About all that is left on the list is the turn signal switch.
Do you have power in and out of the switch ?

Feb 04, 2013 | 1995 Buick Skylark

1 Answer

Turn signal doesn't blink 1994 buick skylark


Check out and replace the flasher relay. This control the turn signals and emergency flashers. Inexpensive part.

May 25, 2011 | 1994 Buick Skylark

1 Answer

The brake lights work but the turn signals don't!! Have checked the fuses and bulbs, but not finding the problem


Fuses and bulbs OK, but wires? Additionally I suggest keep in mind that turn signals work with FLASHER devices (two independent) on 1993 Buick Skylark..

Application: Turn signal
Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted on support bracket

Application: Hazard flasher
Flasher is located: Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel

Hope this helps (remember to rate and comment this answer).

May 14, 2011 | 1993 Buick Skylark

1 Answer

I have a 1992 Buick skylark and the turn signals do not work it's the fuse i know that but witch one?


Your best bet if the fuses are not labeled on the fuse box edges would be to review your owners manual for a diagrahm...if no manual...salvage yard or on auto manuals is your best bet...Hope this helps...(If both side turn signals are lighting up but not flashing, you need to replace the flasher unit...under the drivers side dash)

Jan 27, 2011 | 1992 Buick Skylark

2 Answers

Location of turn signal flasher for 1997 Buick skylark


the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?

Dec 02, 2008 | 1997 Buick Skylark

1 Answer

Flashers Won't work


The turn signal flasher is in a clip attached to the base of the steering column support inside the car. That would put it just about in front of your knees in the drivers seat, up under the bottom edge of the knee panel. I hope this helps you.

Nov 23, 2008 | 1992 Buick Skylark

Not finding what you are looking for?
1993 Buick Skylark Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...