Question about Cars & Trucks

1 Answer

I have a 2002 Grand Am GT 2 door. I need the front & rear bumper replaced. I also need a hood. Just curious if those parts off a 4 door Grand Am will work? If so what year range should I look for to be interchangeable. Thanks in advance!

Posted by on

1 Answer

Wrong place to ask

Try a salvage yard

They have the data base & books to answer that

Posted on May 11, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2002 grand vitara v6, will

I had the same problem on Fraser Island over the Australia Day weekend. The problem was the rubber vacuum hose connected the front diff. There is a metal pipe than comes from the vacuum pump and along the lower engine cross member facing the front of the car. In my case the sand had dislodged the pipe which it turned dislodged the rubber vacuum hose connected from the pipe to the rear top of the front diff housing. This hose engages the front diff / hubs - if they don't engage the 4x4 green light won't come on. After reconnecting the rubber hose everything worked perfectly.

Hope this helps.
Cheers

Posted on Feb 05, 2009

SOURCE: Can Geo Metro parts be used to fix a Chevrolet Metro?

The hood will be the same, but the bumper will be different: the Geo Metro had its turn signals in the bumper and the Chevy Metro had them in with the headlights. The bumpers also look different, however their mounts may be the same. If your sister wants fer car to look the same you should find a bumper from a 1998-2001 Chevy Metro.

Posted on Mar 10, 2009

  • 140 Answers

SOURCE: need to replace the front bumper cover on a 1995 ford escort

its just the bumper cover.. once you buy the bumper cover it will replace your broke one,, however you my need to buy a bumpercover support..i think its only about $30 more..good luck keith...

Posted on Mar 15, 2009

  • 295 Answers

SOURCE: 2001 pontiac grand am gt four door, rear window pass side install

I would go to the local auto parts store and have them print a picture. but the repair is pretty straight forward.

The door panel has to come off. The window motor and regulator have to come off. The motor and regulator is held in screw or rivots.
The rivots have to be drilled out and replaced . Then the window comes right out. The bottom tabs on the window are glue so the window can slide on the track. The tabs have to be ordered seperately or come with the window sometimes.

Have fun

Posted on Apr 05, 2009

briang9000
  • 37 Answers

SOURCE: Toyota Echo 2004 Hatchback Replace Rear Bumper

There is a screw on each side of the bumper cover at the wheel wells. It should be a 10mm. You might have to move the 1/4 liner over a bit to fond them. After those bolts are removed, you can pull the sides of the cover away from the quarter.

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to take driver side rear fender off truck bed its been wrecked and needs replaced please assist thanks


You don't have a rear fender Steve,you have a driver side and passenger side,to remove,on top with hood open,remove 4 bolts,open door and there's 2 more,remove corner light with phillips screwdriver,2 screws there,then at bumper,there's one,have to get under front with a 12 mm nut driver to remove,then at top,they inter lock,lift up to unlock and remove,

Sep 22, 2013 | 1985 Nissan Pickup

2 Answers

2002 jeep grand cherokee larado is over heating. The cooling fanonly runs if I hotwire it. I changed th thermostat. Temp gauge is reading . Could it be the cooling fan relay if so where is it located. The...


Fan relay is located under pass headlight. Remove light assembly, use 2 1/2 " hole saw to drill hole in plastic housing ,3"from back wall, 3'' from left side.This will put you right over relay. Unscrew two bolts,replace. Relay was $40.... dealer wanted$350 to remove front bumper to replace it.

Sep 02, 2010 | 2002 Jeep Grand Cherokee

1 Answer

How to remove the front bumper cover on 2002 avalanche & how to remove the rear bumper cover


Remove all eight small set screws (4) on each side in the fender wheel wells. Then remove the four secure bolts on undercarriage of bumper (4). Take a screw driver. (flathead) to the upper portions of both the left and right side of the bumper. Be careful....... These are extremely fragile and you may need to replace them before replacing the bumper. Then comes a bit unnerving part. Removal of the bumper........ (This scarred the **** out of me!!!!) just grab ahold of one of the corners, then gradually pull! That's it. The clips will come out gradually and evenly.

May 27, 2010 | 2002 Chevrolet Avalanche

1 Answer

2002 Dodge Neon


removing the front end - bumper - radiator support - hood - fenders - this action will show you exactly what you need. All the components are important to make the car complete.

Apr 07, 2010 | 2002 Dodge Neon

1 Answer

How to replace the front bumber on a 1999 grand am?


Jack the car up and put it on jack stands. Disconnect fasteners retaining the splash apron under the radiator. These form part of the wheelwells on each side. Remove the fascia where it is attached to the fenders. Each side will have 4 bolts. remove the 2 bolts i bottom of the bumper they will be on each side of the license plate in the front. Remove the 2 upper bolts in the grille area. This will allow you to remove the bumper skin. To remove the impact bumper remove the u bolt on each side they each have 2 nuts. remove the bumper

Feb 03, 2010 | 1999 Pontiac Grand Am GT

1 Answer

Front hood on Grand AM 2003 SE - hood and front bumper has a gap


Since you are replacing the bumper cover is it safe to say you have had some type of front impact. Any impact could have moved the location of the bumper mounts or shifted panels, or the hood.

Jan 06, 2010 | 2003 Pontiac Grand Am

1 Answer

Hood, Front/Rear Bumper replacement


collisionrepairadvice.com  you can most likely find the parts at the local junk yard.  Yes with some skill and tools you can do these repairs yourself...Good luck

Mar 26, 2009 | 2005 Honda Accord

1 Answer

2002 Grand Am body parts


The official name would be the fender. The panel above the rear wheels are referred to as the quarter panels. You will probably pay a lot more money than you need to by ordering an OEM part online. I would call your local salvage yards and ask them if they have a fender off a similar car. I think the 1999-2005 parts are interchangeable. It will still need to be painted by a trusted paint shop but I still think you will save money and your son's car will still look real good!

Oct 08, 2008 | 2002 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...