Question about Cars & Trucks
I cannot get the light assembly out of the car even though it is unbolted and wires disconnected.
Have you removed the grill as this is usually the part that gets in the way and may hide a bolt/screw or locating pin,have included a link to a u-tube video for a dodge ram headlight removal that might give you the last bit of info you require as most manufacturer's use the same technique's across there model range good luck ,keep me posted if you wish
How to Replace Remove Headlights on Dodge Ram 2009 2010 2011 2012 hid
Posted on May 11, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Mine began like that and then none of the locks and windows worked. Now it is at the dealer (again!) waiting for parts. This is the 5th time a recall defect has been fixed..
Posted on Sep 11, 2009
SOURCE: 2009 dodge journey...rear brake
If the e-brake cable is attached to caliper the piston is threaded. I use a very inexpensive tool i bought at the parts store . you will need to turn and press the piston at the same time. be aware that the two different sides are threaded oposite of each other.If the e-brake cable is not attached to caliperr the a c clamp should do the job.
Posted on Jan 11, 2011
While I could explain what to do, it may be better if you have detailed step by step instructions with illustrations on hand. You can get these free by registering for free at www.autozone.com Once registered you'll have access to a variety of DIY repair manuals.
Posted on Jan 29, 2011
SOURCE: my 2009 dodge journey won't
This is a notorious problem with '08/'09 Journeys. Unfortunately Dodge, nor the dealers have identified the root cause. Dealers will start by replacing the WIN (wireless ignition) module, then the starter, followed by relays, the ELV module, and finally send you on your way. Soon you will stranded with a NO START / CRANK INOP problem again. There is no real solution identified... ...and that's a travesty. Sorry to be the bearer of bad news.
Posted on May 26, 2011
Hi, I will assume this vehicle has an automatic transmision, and a transverse mounted engine. If this is the case the transmision dipstick will usually be located under the hood on the passenger side of the car,
between the engine/trans. and the firewall. Some are on the drivers side based on exactly which drive train is in the vehicle. It will also usually say trans or something similar on it.This should be checked when the vehicle is hot running, in Park and on a level surface.
Hope this helps Vern
Posted on Jan 31, 2012
Tips for a great answer:
Nov 20, 2016 | 2009 Dodge Journey
Jan 02, 2015 | 2009 Dodge Journey
Jul 25, 2014 | 2009 Dodge Journey
Sep 26, 2013 | 2009 Dodge Journey
Mar 05, 2012 | 2009 Dodge Journey
Mar 04, 2012 | 2009 Dodge Journey
Jan 04, 2011 | 2009 Dodge Journey
Nov 16, 2010 | 2009 Dodge Journey
146 people viewed this question
Usually answered in minutes!