Question about Mercury Cars & Trucks

1 Answer

Where is the low pressure AC port on a 2000 mercury sable

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

where is the low pressure AC port on a 2000 mercur - 36950d1118203102-low-pressure-service-port-c-dcp01056.jpg
It should have a plastic cap labeled with an "L". High has a larger port, so a low connector cannot go onto it. Be sure to clean it before connecting as a small piece of dirt or sand can ruin the pump.

Posted on May 10, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 97 grand am low pressure port to recharge

The low pressure port is on the compressor on the bottom side. It should have a black cap on it.

Posted on Nov 03, 2008

c17hydro
  • 2984 Answers

SOURCE: 2000 mercury sable drive belt

For VIN 2 FLEX Fuel:

4488d47.jpg For VIN U and S....with A/C:

c2b84a7.jpg PLEASE DON'T FORGET TO RATE!!!!

Posted on Apr 01, 2009

lastech
  • 408 Answers

SOURCE: AC low pressure port location

hello,good day,you have a 210 model with v 8 engine,your high pressure connection is located at front of your condenser,beside your ax.fan,then your low pressure connection is located at engine walling near your vacuum hose for brake booster,right side ,standing in front,ty

Posted on May 13, 2009

  • 10 Answers

SOURCE: 2000 chevy impala a/c low pressure port

PASS SIDE BY THE DRYER NEAR FIRE WALL.

Posted on Jun 28, 2009

techbuster
  • 5081 Answers

SOURCE: Where is the low pressure ac port or valve located

The low pressure ac port on my 2001 sable is located by the passenger side firewall.

Posted on Jul 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the low pressure AC port on a 2000 mercury sable


it will be in the larger pipe near the compressor or in the line at an accessible point.. The low pressure is the suction line from inside the car to the compressor.

May 10, 2014 | 2000 Mercury Sable

1 Answer

Where is the low pressure switch on a 2000 mercury sable


If you are talking a/c the low pressure switch stops the compressor from working if the gas pressure is low. This is to stop the compressor from running and either sucking in air or running out of oil which circulates through the system. Replacing the switch which should be at the receiver/dryer (that little round cylinder before the condensor radiator) but I suspect that you have a leaking system that no amount of gas refills will fix until something is done to rectify the leak

Feb 03, 2013 | 2000 Mercury Sable

1 Answer

A/c low pressure port


It is under a plastic cover in the low side large AC line at the engine firewall.

Jun 07, 2012 | 2000 Mercury Sable

1 Answer

I have the freon to recharge the ac in a 2002 mercury sable but cant find the low pressure port to charge it


sometimes it's in the fender well on the passenger sie. Just follow the big low pressure hose from the accumulator bottle and you should find it. If not let us know and I will look in trhe shop manual at work tomorrow.

Jun 23, 2011 | Mercury Sable Cars & Trucks

1 Answer

A/C Fan on a 1998 Mercury sable won't come on


It could be low freon and your compressor clutch is not engaging. Have someone turn on the AC while you look at the pulley at the compressor. Low pressure will cause it to "try" to engage or click and then shut down. AC is a "danger" item in self help manuals.

Aug 02, 2010 | 1998 Mercury Sable

2 Answers

Compressor will not stay on when AC is running. Checked fuses already


if turns off or short cycling most likely needs a charge when low on freon low pressure safety will disconnect the compressor to protect it from damage

Jul 20, 2010 | 2002 Mercury Sable

1 Answer

Where is the low pressure ac port or valve located at? on a 2002 mercury salbe


The low pressure ac port on my 2001 sable is located by the passenger side firewall.

Jun 29, 2010 | 2002 Mercury Sable

1 Answer

Where is the low pressure refill port on mercury sable 2002


Look for the receiver/dryer a tall "beer can" shaped device. It should be marked "LOW" or have a larger diameter pipe than the high side of the AC and fit the "self service" charging connect. Your manual has this listed as a "danger" item.

Jul 03, 2010 | 2002 Mercury Sable

1 Answer

Where's the low pressure port (want to recharge a/c)?


it will be very close to the dryer on the line that gets cold when the ac is working properly and the fitting on the recherge kit will only fit the low pressure side. I hope this helps you, Good luck !!

May 10, 2010 | 1997 Mercury Sable

1 Answer

Air conditioning not working and high pressure on the low pressure side .


too much coolant in lines maybe or a compressor leak..maybe call a local AC guy and he may help u out without charge

Jul 25, 2009 | 2000 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

fordexpert

Level 3 Expert

5622 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...