Question about 2005 Chevrolet Trailblazer Ext

3 Answers

OIL LIGHT STAYS ON AFTER OIL CHANGE AND I DON'T HAVE THE OWNERS MANUAL TO GET THE RESET CODE

Posted by on

  • Stan Cather
    Stan Cather May 11, 2010

    Year, Make and model?

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

If its the change oil soon light, turn the key to the on position, do not start it, and press the gas pedal to the floor three times rapidly.And it needs to be done within 5 seconds of turning the key on. the light should go out

Posted on Jun 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 426 Answers

Is this oil light ,oil change light? turn key on and pump gas pedal 3 times.

Posted on Jun 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Try this. With the key on and the engine not running push the gas peddle to the floor and release it three times then hold it to the floor until the oil light flashes. This should reset the oil indicator light. It should not take more than about 20 or 30 seconds.Good luck.

Posted on Jun 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 saturn vue service light on with wrench how do I reset


which service light with wrench their are two of them 01 is inside a car symbol the other is next to an oil container symbol if first on vehicle needs service its also like a check engine this one can turn on for abs-transmission-etc have vehicle scanned for a trouble code --the other is oil change or service reminder both symbols are on page 3-39 and 3-40 of your owners manual the first symbol advises to see a dealer to review the trouble code and page 5-20 explaines how to reset oil change/service light --turn key to on/run position not start and push accellarator 3x and system will reset the following link is owners manual
2004 Saturn VUE Owner Manual

Sep 06, 2016 | 2004 Saturn VUE

1 Answer

I have a 95 grand am se 2.3 liter the other day my low coolant light came om i pulled over emediatley it was low i filled it and have been checking every time i go anywhere it is full and my low coolant...


You may have to reset it by putting in a code. You can find the code in your owners manual. In our Grand Am we have to reset the Check Oil light after we change the oil. For the oil light it is something like press the gas peddle in 5 times within 30 seconds....something like that. Good luck

Aug 14, 2011 | 1995 Pontiac Grand Am

1 Answer

Check oil light stays on even after a oil change


check your owners manual...you must reset after every oil change

Jan 04, 2011 | 2005 Buick LeSabre

2 Answers

My change oil light never goes off even though I had it changed and now my service vehicle soon light is on even though its been running fine


The change oil light needs to be reset after each oil change...some shops are not knowledgeable on how to do this...Your owners manual will instruct you how to reset the oil change light...The service engine soon is a catch all for low fluids and other needs...Be sure to check your oil level again...to clear the service engine soon light, you can disconnect either battery cable for 15 minutes then reconnect...if the service engine stays on...then you need to have your Grand Am checked...Auto Zone does a free diagnostic of check engine light codes...:)

Dec 13, 2010 | 2001 Pontiac Grand Am SE

1 Answer

I change my own oil now the change oil light stays on


you have to reset the trip, Look in your owners manual under service for proper directions

Jun 14, 2010 | 2004 Pontiac Grand Am

1 Answer

How to reset oil change light?


Make and Model: Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra
Years: 2000-01, 1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Hope this help (remember rated and comment this help) Good luck.

May 14, 2010 | 1999 GMC Sierra

2 Answers

Maintenance light blinking


First to check with OBD codes reader, this is one advise to fault; when you have this number (code) the clues for solve the problem are more.

Try it, comment and rated this.

Apr 10, 2010 | 2002 Honda Civic

2 Answers

Oil maintenece light is on. Oil level is good. Could a clogged filter make this light go on?


This should only be indicating time for an oil change. Now, if the red, check engine light comes on, then you have an oil/engine problem.

Possibly the maintenance light wasn't reset when the last change was done. If you don't have the owners manual to check, I found a referenced method (below) to reset it through AMSOIL synthetic oil products. Good Luck

To reset Engine Oil light. Turn the ignition key to RUN with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.

Feb 09, 2010 | Saturn L-Series Cars & Trucks

1 Answer

Does oil light need reset after changeing oil


Check with owners manual to see if this code indicates a change oil or low oil pressure. To be sure, check engine oil level before starting vehicle. If this is a change oil indicator, the owners manual will give the steps required to clear.

Dec 02, 2009 | 2002 Jeep Liberty

4 Answers

Oil light stays on


You need to put the key on and push the gas pedal to the floor three times within five second to reset the oil life light.Some g.m.'s have a reset buttom in the fuse panel that needs to be pushed first and some don't.Check the owners manual under change oil for your specific year car.

Oct 21, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...