Question about 1996 Toyota Camry
Are a 1996 and 1997 camry parts compatible
What's parts are u talking engine parts or body parts
Posted on May 12, 2014
Totally compatible, except auto transmission and manual transmission.
Posted on May 11, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Posted on Mar 04, 2009
That code is for the evaporative emmisions system. Here is a link to an open forum you can go to, this will help you understand what it is, and why. The vehicle on the site is a van, but the code, and parts involved are one in the same, so don't worry about the difference in vehicle. The van is a toyota, and this is the information on the p0446 code. Hope this helps you.
Posted on Mar 08, 2009
If the leak is from the pump unit or steering rack, it will need to be replaced,
If the leak is from a connection hose or coupling it can likely be readily repaired or replaced.
Posted on Aug 27, 2009
the firing order is in fact 1 2 3 4 5 6 the number one cylynder is on the left at the back, as you look at the engine from the front >>
positions of cylinders
1 3 5
2 4 6
Posted on Mar 15, 2010
Tips for a great answer:
Dec 03, 2015 | Cars & Trucks
Sep 20, 2015 | 1997 Toyota Camry
Mar 14, 2014 | Toyota Cars & Trucks
Nov 28, 2012 | Toyota Camry Cars & Trucks
Mar 21, 2011 | 1996 Toyota Camry
Feb 24, 2011 | 1995 Toyota Camry
Jan 22, 2010 | 1997 Toyota Camry
Feb 23, 2009 | 1995 Toyota Camry
189 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: