Question about Cars & Trucks
Maybe you crossed the possitive and negative cables?
Posted on May 10, 2014
You cannot by pass an immobiliser, that is its job. its not just fuel it cuts out but fuel pump and injectors too.
Have you tried your spare key?
If no spare, i would suggest you ring your local auto locksmith who will get you sorted in about 30min.
Posted on May 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Truck Won't Start At All
before replacing the starter get a volt meter and test the voltage coming out of the voltage regulator which the power comes from the battery to the regulator down to the starter also make sure all wires on the starter are clean and what I mean is from rust because I had an f150 that did the same thing
Posted on Jan 09, 2009
SOURCE: ford focus rs alarm trouble
if its a factory alarm you put the key in and quickly turn the key on and of i cant remember if its 8 or 9 times but the horn will chirp then you push the lock and unlock on the fob the locks should respond then turn key off and your done. note that if you have more than one fob you have to press lock and unlock on all of them before you turn the key off and i believe you only have about fifteen seconds to do so if not let me know i will look it up at work
Posted on Sep 14, 2009
System arms 5 seconds after switching ignition OFF. Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. If LED flashes rapidly at regular intervals for approximately 1 minute, then flashes at irregular intervals: Key code not recognised. Remove key and try again.
System malfunction: LED illuminates for 1 minute, then flashes at irregular intervals. Key(s) added or replaced.
NOTE: Replacement keys MUST have blue mark. Keys with red mark are NOT compatible with this system.
NOTE: Programming method using vehicle keys can be deactivated using diagnostic equipment.
Obtain 2 programmed keys (A and B). Insert key A into ignition switch. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key A. Insert key B into ignition switch within 5 seconds. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key B. Within 10 seconds: Insert key to be programmed into ignition switch. Turn ignition switch to position II. Wait 4 seconds. Switch ignition OFF. Wait 5 seconds. Start engine. If engine does not start and clock LED flashes: Switch ignition ON. Wait at least 20 seconds. Switch ignition OFF. Repeat programming procedure. Repeat above procedure to program remaining keys. Keys can also be programmed using diagnostic equipment
Posted on Mar 08, 2010
Tips for a great answer:
Dec 11, 2012 | Cars & Trucks
Apr 18, 2010 | 2001 Ford Focus
Feb 16, 2010 | Ford Focus Cars & Trucks
Sep 13, 2009 | Ford Taurus Cars & Trucks
Jun 20, 2009 | 2000 Ford Focus
Jan 25, 2009 | 2003 Ford Focus
Dec 01, 2008 | 2003 Ford Focus
Oct 19, 2008 | 2003 Ford Focus
21 people viewed this question
Usually answered in minutes!