Question about 2006 Toyota Land Cruiser

Open Question

Toyota torque wrench setting for diesel injector

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 333 Answers

SOURCE: I need to know the torque wrench settings for

The small bolts holding the caliper to the bracket are 20 ft/lbs
The larger bolts holding the bracket to the hub are 79 ft/lbs

Posted on Sep 18, 2009

  • 26 Answers

SOURCE: Torque wrench settings for a 1998 Toyota Rav4

It would seem that @ 8Nnm you were under the torque to properly seat the gasket and it blew out. Going down @ 5Nm may worsen the issue.
My manual lists 11Nm for many of the smaller bolts in the auto trans. Unless you believe that you over tightened and that's why it blew out?

Remember to evenly cross torque/tighten the bolts to get even seating. Did you use any sealant on one side of the gasket, that may help (only apply a small thin continuous sealent bead...this will help stop gasket movement and blowout)

Posted on Oct 03, 2009

  • 22265 Answers

SOURCE: Hi, I would like to know torque settings for

about 35 to 40 will suffice ,after all its only ally

Posted on Jan 26, 2010

  • 61 Answers

SOURCE: need torque wrench settings for head bolts on 1984


Posted on Feb 26, 2011

  • 2620 Answers

SOURCE: Can you please tell me

29 ft-lbs.

Posted on Apr 05, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I remove the fuel injectors?

  1. Disconnect the negative battery cable with a socket wrench and relieve the fuel system pressure. Disconnect the vacuum hose and remove the intake manifold collector from the fuel pressure regulator.
  2. Detach the fuel hoses from the fuel rail with a socket wrench and disconnect the fuel injector electrical connectors. Remove the fuel rail mounting bolts with a socket wrench so you can separate the fuel rail assembly from the intake manifold with the fuel injectors still attached.
  3. Push on the fuel injector tail piece to separate the injector from the rail. Discard the fuel injector O-rings.
  4. Lubricate the new O-rings with a small amount of clean engine oil and install the new fuel injector by reversing the removal procedure. Use a torque wrench to tighten the fuel rail mounting bolts in two stages. First, torque the bolts to between 84 and 96 inch pounds and then torque them to between 15 and 20 foot pounds

Mar 06, 2016 | 1996 Nissan Sentra

1 Answer

My injector nozzles for Toyota Hilux 2.5 is loose I need to now if they need to be torqued and with how much

no year? lots of years, no? and lots of 2.5L no>? why not learn what engine you have, 2M? diesel 2J? , 2AR? , 1JZ, 2VZ , 4VZ,2MZ
3gr, 5GR. we can not guess engines. not now , not ever.
what year, what engine, gas or diesel.
that is the first when taking cars, after all even Toyota parts
guy says the same thing,for same reasons.
or post the VIN.

new seals are for sure needed log and and read, its there.

torque varies by engine,

Dec 02, 2014 | 2007 Toyota Hilux 2.5

1 Answer


Dear Fixya team,
Thanks , I found the torque settings from a diesel mac.
it is 33lb/ft.

Jan 23, 2010 | 2005 BMW X5

1 Answer

I need to know the torque wrench settings for toyota rav4 brake caliper bolts. Any help gratefuly recieved.Is there a web site that lists torque wrench settings for specific vehicles.

The small bolts holding the caliper to the bracket are 20 ft/lbs
The larger bolts holding the bracket to the hub are 79 ft/lbs

Sep 18, 2009 | 2000 Toyota RAV4

1 Answer

Torque settings for big ends on a 97 toyota camry 220sei

On the V-6 it's 25 Nm (18 ft lbs) on the first pull and then you rotate the next pull 90 degrees using a torque angle wrench.

Checking the specifications for the four cylinder:
25 Nm (18 ft lbs) on first pull and 90 degrees
on the second pull using a torque angle wrench.

May 01, 2009 | 1990 Toyota Corolla

Not finding what you are looking for?
2006 Toyota Land Cruiser Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides