Question about Cars & Trucks

Open Question

I need tightening torques for proton arena engines

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: Head bolt torque specs needed for 96 tbird 3.8

Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:

  1. 20 Nm (15 lb-ft).
  1. 40 Nm (30 lb-ft).
  1. 50 Nm (37 lb-ft)
Loosen retaining bolts one at a time two to three revolutions and retighten as follows:

Long bolts:
  • Tighten to 40-50 Nm (30-37 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Short Bolts:
  • Tighten to 20-30 Nm (15-22 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Here is a pic of the sequence
http://i253.photobucket.com/albums/hh43/chuck943/Headboltsequence38L.gif

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Proton arena immobilizer


what is the question ??

Sep 24, 2016 | Proton Cars & Trucks

1 Answer

2007 1,5 Proton Arena. Cold starting very rough (stalls). Once on temp all Ok. ps yellow engine light on whole time.


You need to have the diagnostic codes read. Anything else is pure guessing. Those codes can point you in the right direction and often will tell you exactly what is wrong.

Aug 19, 2016 | Proton Cars & Trucks

1 Answer

When 4d33 engine tightened without using a torque wrench, can the engine perform well?


What did you tighten without a torque wrench? There are hundreds of fasteners on an engine. If it needs a torque wrench and one was not used, then it is very rare that it will be ok for very long.

Jan 14, 2016 | Cars & Trucks

1 Answer

What is the torque on Proton gen 2 head bolts


Hi simba, the maximum torque on a SP4H is 148 Nm at 4000 rpm.

Apr 10, 2014 | 2004 Proton Gen-2

1 Answer

We are looking for the torque wrench settings for a 2010 proton gen2 car, with a 4 cylinder s4ph engine


1ST 11LB/FT
2ND 22LB/FT
3RD 33LB/FT
4TH 44LB/FT (FINISHED) THIS IS THE TORQUE PROCEDURE FOR HEAD BOLTS

Feb 10, 2014 | Proton Cars & Trucks

1 Answer

I need the cylinder head torque settings for 1997


1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is called the M10, other is the M12, figure out which one you have cause the torque is different for stage one by 5nm........... Dont get confused theres 2 different engines so 2 different torques for stage1---------
heres the full details: Stage 1 - m10 = 30nm / m12 = 35nm-------------------------- -------- Stage 2 - tighten by 60-65 degrees ------------ stage 3 - tighten by 60-65 degrees. no sequence is given in the data book for tightening so go off what you thinks right, it doesn't matter on this engine.

Nov 17, 2009 | 1997 Hyundai Elantra

1 Answer

Needing engine bolt torque specifications for a 2006 Ford Five Hundred with 3.0 liter engine. This will need to include rod and mains torque and torque rotation.


stage 1 tighten to 30 ft pounds
stage 2 tighten 90 degrees
stage 3 loosen one full turn
stage 4 tighten to 30 ft pounds
stage 5 tighten 90 degrees
stage 6 tighten 90 degrees
this is per mitchell on demand courtesy of ford specs on the lft and right head.
for some reason there are no torque specs on mitchell for connecting rods and mains.

Sep 15, 2009 | 2006 Ford Five Hundred

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...