Question about 2000 Chevrolet S-10

Open Question

Chevy s10 How do you replace a broken door hinge?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Replacement of gas door

A friend who is a mechanic fixed it for me. Thank you.

Posted on Aug 26, 2008

  • 19 Answers

SOURCE: Chevy S10 extended cab third

This is a very easy fix, I ordered a new metal one off of ebay came with instructions and was very easy to do.

Search CHEVY S-10 THIRD 3RD DOOR HANDLE 1996-2005 GMC SONOMA
on ebay, the sellers name is s.gifenigma326 very easy to work with cost 15 bucks, shipped on time.

Posted on Jan 09, 2009

  • 4 Answers

SOURCE: 2002 chevy silverado 1500 door hinge pins

You will have to remove the old ones (a round punch of about 1/4" works well, then remove and replace parts (two punch up, two punch down). BE SURE you have the door supported with a block of wood under the door while doing this. It would help for two people to do it also, but not 100% necessary. Good Luck ALSO REMOVE THE LATCH THAT KEEPS THE DOOR FROM SWINGING ALL THE WAY OPEN, THAT WILL GIVE YOU BETTER ACCESS.

Posted on Mar 16, 2009

sawdust46694
  • 398 Answers

SOURCE: need replacement door hinge for 92 S10 pickup

Most auto parts stores have hing pin replacment kits. they are easy to put in. you need one helper and a floor jack. i got mine at napa they had a KD rack with KD tools and parts on the rack.

Posted on Aug 12, 2009

  • 1 Answer

SOURCE: i have a chevy s10 and i need help to fix the door

I had an Isuzu with the same problem(they are the same car) have you made sure that the bushing is available,some hinges have hinge pins that
are rounded on both ends ans can't be removed without a grinder(this should be left to a pro) if it is a straight pin you can use a punch and hammer to take it apart,or you can replace the whole hinge(which I did)
Hope this helps a little

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 Chevy Venture van will lock all the doors with the door lock but it will not unlock the doors.


I would try a replacement used lock/unlock switch panel before anything else,it would cost almost nothing used and usually fixes this problem,and the switch panel pops out easily for replacement Next possibility would be a broken wire where the wires flex at the door hinge area.Grab one wire at a time and pull firmly until you find a broken one. Make sure the replacement switch panel is a known working one.

Apr 06, 2017 | 2003 Chevrolet Venture

1 Answer

How do i remove door hinges on 1997 chevy s10?


its probably the door hinge pins. use a floor jack to support the door. have it jacked up slightly to get the weight off the pins before removing. chevy should have a kit for it

Apr 24, 2014 | 1997 Chevrolet S-10 Pickup

1 Answer

Door pin and bushing


If your S10 is a 2001, your best bet is likely to be a junk yard

Jun 27, 2013 | Chevrolet S 10 Cars & Trucks

1 Answer

2000 Chevy S10 passeger door won't open


Remove the door panel and inspect the latch rods for damage or broken retention clips. A video is below of how to remove the panel.

Nov 06, 2012 | 2000 Chevrolet S-10

1 Answer

Driver door needs to be align. Can I do it myself?


If the door wont line up correctly, is most likely due to bad hinge pins. Open door try to raise up on outside of door near bottom. If it has play hinge pins need to be replaced.

Jul 09, 2010 | 2001 Chevrolet Blazer

1 Answer

How hard is it to replace the door hinges on a Chevy S10 P/U? Hinge pin kits WON'T HELP. The hinges are WORN OUT. I am an advanced DIYer. Can I do it myself, or must I take it to a shop? Any help will be...


its not bad to do it yourself. but it will take 2 people to do it. have your helper open the door and lightly lift it up so the pin is free then slide the pin up and out and then the door can move off the hinge so you can get the old brass sleeve out and replace it with the new one and slide the door back on and replace the pin. i would only do one hinge at a time and do the bottom one first.

Apr 22, 2010 | 2000 Chevrolet S-10

1 Answer

I have a chevy s10 and i need help to fix the door hinge and bushing. do i need a special tool? thanks michelle


I had an Isuzu with the same problem(they are the same car) have you made sure that the bushing is available,some hinges have hinge pins that
are rounded on both ends ans can't be removed without a grinder(this should be left to a pro) if it is a straight pin you can use a punch and hammer to take it apart,or you can replace the whole hinge(which I did)
Hope this helps a little

Nov 20, 2009 | 2002 Chevrolet S-10

1 Answer

How do i install hinge pins on a 1994 chevy s10?


Pretty basic. Just hold your door up with a floor jack or block of wood, bang the pins up, replace the bushings, and install the bushings and pins. Do one at a time.

Oct 04, 2009 | 1994 Chevrolet S-10

1 Answer

Chevy S10 extended cab third door latch broken. Is this something I can replace myself? I've removed the two hex-star screws, but am afraid to pry off housing and causing further damage. Handle is...


This is a very easy fix, I ordered a new metal one off of ebay came with instructions and was very easy to do.

Search CHEVY S-10 THIRD 3RD DOOR HANDLE 1996-2005 GMC SONOMA
on ebay, the sellers name is s.gifenigma326 very easy to work with cost 15 bucks, shipped on time.

Jan 06, 2009 | 2000 Chevrolet S-10

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...