Question about 2006 Renault Laguna 2.0

Open Question

Renault codes Have this fault code 20684/072 may relate to breaks

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
morse008
  • 1111 Answers

SOURCE: ENGINE FAULT

sounds like a fuel filter issue or injector issue the idea behind turning the key on and off then back on is to run the fuel pump as it will pressurize the line or it could be the fuel pump itself have you ever run injector cleaner through your tank ...also may be a actually a few many things i consider all possibilities 1 st visually inspect all vacuum lines and wires that may be exposed as well as the fuel line etc.you can check for fuel pressure with a fuel pressure gauge Auto Zone will lend you the tool on the spot to determine the proper pressure and this will help you in the process of elimination

Posted on Sep 10, 2009

Ad
  • 8 Answers

SOURCE: I have completed a diagnostic

I have the same problem few days ago and found my solution on Fixya Expert Sources website. Here you will get all the top sources of your problem. All the sources of this site provided by top Fixya Gurus. Have a good look at the sources of the page. Go through thesources to find your solution. Hope it will help.


View Count:3

Posted on Sep 04, 2011

  • 1 Answer

SOURCE: renault trafic fault code 0177 and 0183 and 0001

need code for renAULT TRAFFIC 2006

Posted on Mar 04, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reduce engine power light came on and engine power was reduced is this something I can trouble shoot


yes - the fault code will be recorded so have the fault codes read
the fault may relate to a transmission problem as well as an engine fault
once yo have the code/s comment and we may be able to assist as to possible causes for the fault

Oct 15, 2015 | 2002 Chevrolet TrailBlazer

1 Answer

Fault code 1 Fail 31 Spn1569 2015 Cascadia Cummins engine


spn 1569 relates engine protection torque derate -condition exists.
critical fault codes related to engine operation are active
code 1 means urgent attention
A sort of limp mode setting that requires immediate attention by a cummins service center to prevent further damage to the engine
go google and type in--- cummins engines fault codes (or cummins engine fault code 1569) and there are pages of pdf downloads that list all the codes and what they stand for

Oct 07, 2015 | Cars & Trucks

1 Answer

Code PO049 & PO171 on GMC ENVOY 2006


Hello, First I could not find any relative info on the p0049 code. Please double check and make sure that code is accurate. Next, for the P0171 ive seen the O2 sensor be at fault here but it is not very likely (but possible) More likely would be the Mass air flow sensor. Inspect it and clean maf if any change or improvement, this shows you are going in the right direction so replace it. Also, you can unplug it let it and see if it sets a code. Next, another likely cause is Purge solenoid. This fails by not allowing vacuum to pull gas into the engine. Common fault for this code and this vehicle... The last important step i can have you do is see if you have a disconnected pcv hose under front of plastic intake. With plastic anything can happen. Check for breaks, leaks etc. I will attach a troubleshooting tree for you. Let me know if you need further detail on any of the above info. Regards,
-Tim

25773577-jq13pypi3egybe0aho3o0ljx-4-0.gif

25773577-jq13pypi3egybe0aho3o0ljx-4-2.gif
  1. If conditions were not corrected, a worn cam, worn intake or exhaust valves, or other engine mechanical failures may be at fault.

Jul 06, 2015 | GMC Cars & Trucks

1 Answer

Fault codes I have on my bmw x5 2003 is p3505 p1260 p09f6 what do I need to fix them


P1260 is pre supply pressure monitoring, rate reduction due to low-pre-supply pressure. That is, fuel related. However, this normally triggers limp mode (<30mph/<2000RPM). Not uncommon on the X5. I would start with replacing fuel filter before delving into the lift pump/fuel delivery unit, in tank pump etc. Clear fault codes, run the car again then see what happens again - same fault codes?...then its delivery fuel pressure related. Should be 3.9bar at idle and not drop below 3.5bar.

Nov 04, 2013 | Cars & Trucks

1 Answer

2005 Mazda Tribute P0172 & P2270


Hi Paul, Have you had a fault code relating to the knock sensor? That sensor controls ignition timing which can have a relationship to the fault codes you report? Regards John

Apr 06, 2013 | 2005 Mazda Tribute

1 Answer

More acceleration


The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.


The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type. Also engine mechanical problems ca cause many drive-ability related problem such as rough idle and other symptoms








Oct 12, 2012 | 2002 Land Rover Freelander

1 Answer

The stupid car is so dumb and the touch screen keeps breaking and my seat warmer is too hot! someone fix it!


Hello
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.

Sep 06, 2012 | 2011 Lamborghini Gallardo LP

1 Answer

Engine code reads P1776 1/2 and P0700 transmission


P0700-This Relates to MIL"Malfunction Indicator Lamp")( Request - Control System for Transmission
unable to locate description for P1776,can you get all systems scanned for codes again as 0700 just indicates that a fault has occurred that has lit the check light and logged at the ECU.
Obviously it will be related to the shift fault,maybe a speed sensor or a dirty fluid fault.
Get back to me with any extra info.

Apr 10, 2011 | 1998 Chrysler Town & Country

1 Answer

Warning lamp flashing warning lamp shaped like a coiled spring started flashing. causing car to stutter badly. light went out when i restarted car.


Hi, that symbol is the MIL (engine check light) on the diesel cars. You probably have an intermittant fault, if you find someone with an EOBD code reader - which most garages have. They will be able to read the fault code which will have been stored relating to your fault.
Hope that helps Matt...
P.S If the fault relates to the EGR valve speak with your VW retailer as the car may need a (free I think) software update.

Nov 22, 2009 | 2006 Volkswagen Passat

1 Answer

Lexus RX 300 symbol


That's a traction control or skid control system indicator. Usually these systems are on by default, so if you turn them off (or if they fail) the indicator will come on so you know the system is not engaged. I would have a shop scan the computer for fault codes to see if a failure is logged - it may be with a yaw sensor, or a wheel speed sensor (which could also manifest as an ABS problem), or some other fault, including a possible stability control computer failure or fault. But the first step is to see if there are any codes stored in the system, and those codes will point you in the right direction to fix the problem.

Oct 10, 2008 | 2000 Lexus RX 300

Not finding what you are looking for?
2006 Renault Laguna 2.0 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

xxxxxx xxx

Level 3 Expert

4876 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...