Question about Cars & Trucks

Open Question

Oasis vortec set up instructions to set up a vortec oasis with uv light

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low coolant. Coolant leaking somewhere


There is a UV dye you add to the radiator this will tell you where the leak is. You add it to the radiator drive vehicle for a day or so. You will need a kit contains a UV flashlight and a pair of UV glasses can be purchased at autozone for around 15 dollars. The dye cost around 10 dollars. Simply shine light around hoses, radiator and all connections the leak will show up yellow. Very easy to do I do it all the time.

Jul 02, 2016 | Cars & Trucks

1 Answer

How do I find and repair a/c leak in 2001 dodge dakota


There is a charge kit that contains a dye that is visible with UV light. You can put this in and then check for leaks using a uv light.

Aug 23, 2014 | 2001 Dodge Dakota

1 Answer

Laguna PF 3200 By ASKOLL


sorry I meant powertrain cradle

Jul 10, 2013 | Cars & Trucks

1 Answer

Instruction for having computer set timing on 98 chevy s10 4.3 vortec v6


the computer can not set the timing if the distributor is off or if the timing chain off

Nov 01, 2012 | Cars & Trucks

1 Answer

My gf has a 2001 blazer with the 4.3 vortec. it is leaking antifreeze and i cannot find the leak, its not getting in the oil,and the floorboards are not wet. someone told me that it could be the intake...


Most likely the intake gasket is leaking.You can check under the ac compressor and back by the transmission bell housing these are where the intakes usually leak. If you have a uv light it will illuminate the antifreeze very brightly.

Dec 04, 2010 | 2001 Chevrolet Blazer

2 Answers

I thought it was the water pump that was leaking and needed replaced, but it not. We can see where it is collecting but not where it is organting from. Can you tell me what you think


check out the housing for the thermostat...check out the heater hoses where one connects to the thermostat housing, the other to the waterpump....just replaced one on a honda that was pin hole sized and nearly impossible to see....also check headgasket and intake manifold gaskets...good luck

Mar 22, 2010 | 2004 Ford Explorer

1 Answer

I cannot seem to find the esc wire on my 98 chevy


there is no esc wire on a vortec. the distributor is set to zero degrees. if the check engine light stays on then adjust the distributor, clear the code, and try again. once the light will stay off it should be set right.

Oct 25, 2009 | 1998 Chevrolet K1500

1 Answer

My 1998 Chevy 2500 vortec 4.3 v6 van starts and dies instantly


sounds like your engine immobiliser fuel cut off is activating.try taking battery teminals off,re-connect and re activate your immobiliser fob the usual way,**** it will re-set itself,& or your fob battery may need changing,it,s anti-theft cut off that is your problem.good luck.

Jul 28, 2009 | Chevrolet 2500 Cars & Trucks

1 Answer

A/c ran cold for two weeks.Then ran hot with high pressure


uv test show where dye is leakin but if you have rear a/c as well the lines should be checked to the rear

Jul 21, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...