Question about 1985 Chevrolet S-10
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
EXACT PROCEDURE ! Please Rate Me Fairly for this!! Thank you And Good Luck !!
REMOVAL and INSTALLATION
NOTE: To ease pump installation, rotate the camshaft so the camshaft eccentric is out of the way of the fuel pump rocker arm.
Posted on Mar 22, 2009
Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don
Posted on Jun 25, 2009
Go to autozone.com and "Shop" for your part. When you find it look on right side of page and click on "Get instructions installing..." Then register to become a member and BINGO! You'll get your instructions.
Posted on Jul 25, 2009
94 chevy cav. after driving for a while, the car shuts off when u break. it will start back up but stalls as soon as you put it in a gear. let it sit for half hour and it will drive again for a while then starts the process all over again. any suggestions
Posted on Oct 28, 2009
replace the blower motor resistor located on the heater box were the blower motor is located the wiring to the blower may go to it. This is very easy to locate if you buy the part first.
Posted on Jan 06, 2010
Tips for a great answer:
Dec 10, 2015 | 1994 Chevrolet S-10
Sep 24, 2015 | Chevrolet Cars & Trucks
Mar 29, 2013 | 1998 Chevrolet S-10 Pickup
Dec 07, 2012 | 1985 Chevrolet S-10
Jul 21, 2010 | 1999 Chevrolet S-10 Pickup
Apr 05, 2010 | 1984 Chevrolet Chevy
Nov 27, 2009 | Chevrolet S 10 Cars & Trucks
Dec 28, 2008 | 1985 Chevrolet Chevy
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: