Question about 2010 Hyundai Santa Fe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.
Posted on Apr 06, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
You'llhave to raise the rear compartment door fully. Next locat the tailight you wish to replace or same if you are replacing one of the tailigt bulbs. This would include the stop bulb or turn signals etc.
Next there is a black plastice side panel located between the lamp assembly (the entire plastic housing) and the inner portion of the rear compartment door. There you'll see two phillips head screws which you must remove. This releases the entire assembly.
You then next gently give it a small tug toward the left (if a left side assembly) or to the right if other wise. What happens there is that there is a stud that's held pretty snuggly by a modled ring in the body assembly. Don't twist the lamp assembly up or down unless you want to break this off but give it a slight pull outward. Then you're done. The entire assembly will be released and you'll be home free for changing any of the bulbs or even replacing the entire assembly. W/o breaking it of course.
Posted on Jul 15, 2010
raise the front end.
Starter is mounted to the lower-left side of the engine.
You didn't specify an engine, so assuming the 2.7 V6.
Starter is a cylindrical canister about the size of a large can of beans...Follow the heavy red cable from the battery down to the front of the starter.
*You may need to remove the transaxle cables for access*
Take the old starter with you to buy the replacement, and you'll get your core credit on-the-spot.
As a side note: the '02 models were recalled in Jan '03 for faulty starter assemblies...but I don't see a note on the '03.
Posted on Sep 07, 2010
Tips for a great answer:
Nov 27, 2016 | Hyundai Cars & Trucks
on Oct 24, 2013 | Hyundai Cars & Trucks
May 20, 2016 | 2010 Hyundai Santa Fe
Feb 12, 2016 | 2010 Hyundai Santa Fe
Jan 31, 2016 | 2002 Hyundai Santa Fe
May 08, 2015 | 2006 Hyundai Santa Fe
Mar 25, 2015 | 2010 Hyundai Santa Fe
Apr 27, 2014 | 2010 Hyundai Santa Fe
Aug 27, 2011 | 2004 Hyundai Santa Fe
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: