Question about Volvo XC90

1 Answer

Turn signals not working

All fuseschecked ok

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 40 Answers

I presume you also hear NO click click click when you turn the flasher on.
Turn signals work off a Solonoid, fuses, and a charged battery.
Since the fuses are OK, the car starts, the most likely cause is the solonoid. It's a little square colored box about 2 to 2 1/2" inches long,
1" wide, and 1" deep. They are color coded to recognize the device.
The little box plugs in under the dash, were it plugs in changes by make and model and year. The easiest way is to go to an Auto Parts supply house and give Make, model, and year. Then you can see the color, go under the dash with a Flashlight are carefully look for the same color device. Unplug by pulling it straight out, replace with the new. Your flasher should work.

Posted on May 10, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal flashes fast but bulbs good


You need to replace the turn signal flasher with a heavy duty one.

Oct 19, 2013 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Left turn signal will not work


either wrong signal bulb or short in left turn signal wiring if both left signal lamps not working.if only one of left turn signal dont work could have corroded bulb socket spray a little electronic cleaner in bulb sockets see if left signal work.

Nov 27, 2011 | Cars & Trucks

1 Answer

Driver's door got rained on , now the windows, locks and mirror functions do not work on the driver's door, fuseschecked, all good, passengers door and back doors all functions still work?


Check the connector in the driver side door shut, clean terminals and give a spray with something like WD40 and then try ( let the WD40 dry out before operating )

Oct 08, 2010 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

Turn signal does not work


Hi there,

I'm assuming neither of your turn signals work?

Firstly, check the 15A Turn fuse in the fuse box. If fuse is ok, then operate your HAZARD light function.

If no Hazard lights operate, then suspect a probelm with the Turn Signal Flasher unit.

If Turn signal flasher tests ok, then fault lies within the Turn switch.


"If this has helped you in any way, please rate this solution"

May 02, 2010 | 1998 Buick Riviera

1 Answer

Front driver turn signal quit. changed bulb, worked for short time, then quit. bulb OK. passenger side quit 1-2 months later. bulb OK. neither front emergency flasher work. automatic daytime front lights...


Check for head light (daytime)relay to be bad,this might have to do with the turn signals also,if the turn signals on this car,also have running lights in them,If this relay is not bad,replace the body control module.

Nov 07, 2009 | 2005 Pontiac Grand Prix

1 Answer

REAR BRAKE LIGHTS DO NOT COME ONLY TAP LIGHT IS


Check for power at the turn signal switch. White wire comes from brake switch switch into the turn signal switch. The brake light switch is working because the high mount brake light is working..right? Do the turn signals work ok? if so, then the wiring is OK. The brake signal wires that come out of the turn signal switch are dark green(right) and yellow (left).

Oct 27, 2009 | 2001 GMC Safari

1 Answer

This car is a column shifter I HAVE A 1997 MERCURY SABLE, ONE OF THE PROBLEMS IS THAT THE REAR TURN SIGNAL AND HAZARD DON'T WORK, ONLY THE FRONT ONE ARE OK.FUSE IS OK,BULBS ARE OK, TURN SIGNAL FLASHER OK...


the turn signal problem sounds like the multifunction switch (the turn signal switch) is bad as far as the radio and windows it sounds like the trans range sensor is bad it is located on top of the trans at the shift linkage

Jul 07, 2009 | 1997 Mercury Sable

1 Answer

1987 toyota camry s/w back left (driver's side) turn signal does not work, bulb and ground are good, front left signal works but flashes fast, rt side signal both working ok. when emg flasher is turned...


Problem solved, Since 3 of the 4 turn signals worked I did not fuse was a problem
but after checking the turn swithch, I pulleded out the fuse which looked ok, but when
I put it back in all the turn signal lights woked! Apparently just one part of the surface
of the fuse was corroded.

Aug 01, 2008 | Toyota Camry Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...