Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My rear brakes were making the same sound for over one year. My rear shoes were hard as a stone or glazed. The pads did not look worn, but they made the medal-on-medal sound when I braked. It was pretty loud.
I replaced the brakes shoes and the problem went away. I replaced the shoes myself in about a hour. They were not hard to figure out.
Posted on Nov 23, 2008
HI, i would inspect the strut assembly for loose structure asap. i would also inspect the wheel knuckle and rotor and tie rod ends for loose fit as well. inspect thoroughly.
Its most likely the CV-joint assembly. the boot may have slipped off, allowing the joint assembly to dry up. i advise to inspect all the above before looking at the CV-half joint assembly and boot.
Posted on May 25, 2009
check the brake dust shield. or check brake pads they have a shim on the padson caliper braket sometimes they move when putting on pads. email me bake if this helped. richie n.y.
Posted on Jun 29, 2009
Wheel bearings are likly and I've changed many to solve this problem but it's esy to pick the wrong one with e vehical jacked and on jack stands suporting the car by the lower control arms ( normal ride hieght) run the car with a driver and listen to ti run , of course theres no load on the powertrain so there will be some lash ( power on to power decline ) cheack up. The roaring noise can be isolated by puting a sounding bar ( long metal rod ( sr=crew driver)) other against the part till the sound is rounded up rear but possible the carrier bearings in the (rear end) front drive. The axel bearings and on some units the carrier bearing thats in the CV axel on the block. Sounding rod will find and change the noisey part. Professional help is a good idea if you can't carry this out saftly
Posted on Aug 19, 2009
Tips for a great answer:
May 24, 2014 | Cars & Trucks
Dec 31, 2010 | Chevrolet Lumina Cars & Trucks
Jul 22, 2010 | 2004 Dodge Neon
Dec 12, 2009 | 1995 Toyota Corolla
Nov 24, 2009 | 2003 Chevrolet Impala
Sep 19, 2009 | 1999 Pontiac Grand Am GT
Jul 31, 2009 | 2001 Hyundai Santa Fe
Jun 13, 2009 | 2002 Hyundai Santa Fe
Apr 09, 2009 | 1996 Buick Regal Olympic Gold
Nov 19, 2017 | BMW Cars & Trucks
12 people viewed this question
Usually answered in minutes!