Question about 2002 Chrysler Voyager
I can't find a diagram
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 18, 2017 | Cars & Trucks
Ignition is in the RUN, START, or ACC position and security system diagnostics have all PASSED
SECURITY TELLTALE will be on if:
The BCM is performing a bulb check at vehicle start
Security system diagnostics have not yet completed at vehicle start
A security system diagnostic trouble code (DTC) is set in the BCM or PCM
SECURITY TELLTALE will be flashing if:
The tamper hall effect sensor has been triggered
Incorrect passlock sensor data to BCM for more than 5 seconds during vehicle start
No passlock sensor data to the BCM for more than 5 seconds during vehicle start
Incorrect password from the BCM to the PCM after 5 seconds during vehicle start
Oct 23, 2015 | Saturn Cars & Trucks
Oct 10, 2015 | Saturn Cars & Trucks
Jun 01, 2015 | 2004 Chevrolet Impala
Feb 04, 2013 | 1999 Suzuki Vitara
Camshaft Position Sensor High Input
CMP (Hall) sensor signal circuit is open or shorted to ground.CMP (Hall) sensor ground circuit is open.CMP (Hall) sensor power circuit is open (check fuse in the I/P).CMP (Hall) sensor is damaged or has failed.PCM has failed.The other code is not listed in this listing.
Dec 22, 2012 | 2005 Hyundai Sonata
Before servicing the vehicle, refer to the precautions.
Remove air filter housing.
Remove hot film mass air flow sensor.
Remove air duct housing.
Release and disconnect electrical connector at crankshaft Hall sensor.
Pull crankshaft Hall sensor out of crankcase.
CKP sensor location
Installation is the reverse of removal.
Tighten crankshaft Hall sensor to crankcase bolt to 6 ft. lbs. (8 Nm).
Carry out first initialization and then sensor rotor adaptation using Star Diagnosis tool.
Oct 22, 2010 | 2002 Mercedes-Benz C-Class
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: